Your MG that started off as a hull

[tagasagwan]

Have you ever tried using one of these? Works great!

http://www.teamnovak.com/products/lipo_cutoff_module/index.html

5472_1000px.jpg

[skyman]

Have you ever tried using one of these? Works great!

http://www.teamnovak.com/products/lipo_cutoff_module/index.html

[ATTACH=CONFIG]77829[/ATTACH]

no, i haven't... so i called traxxas and gave them heck for having a crappy product. i'm sending it in again since i told them that i had tried another brand battery and that it was having the same problem.
my son is pissed

[tagasagwan]

Does your esc has an option were you can set a certain voltage for the LVC to kick in? If so, try setting it at 3.3v per cell.

[skyman]

Does your esc has an option were you can set a certain voltage for the LVC to kick in? If so, try setting it at 3.3v per cell.

i don't think you can adjust it like the castle esc where you connect it using castle link. but i could be wrong.

[skyman]

btw, i received the hw esc & program card today. i am on my way

[tagasagwan]

i don't think you can adjust it like the castle esc where you connect it using castle link. but i could be wrong.

What? even the cheap turnigy esc's gives you that option. Try check the manual maybe you just missed out that feature. Also, I could be wrong! LOL!

btw, i received the hw esc & program card today. i am on my way

Good! You're getting there my man!

[skyman]

Ok I will do that first thing in the morning.

Thanks bro!

Sent via Tapatalk

[skyman]

ok guys, should i pull the trigger on this one? i offered $150 shipped, lets see if they accept

http://www.ebay.com/itm/160813153799?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649&autorefresh=true

update: he just accepted the offer

[skyman]

ok, so here's what i have so far for the MG build (either on order or received):

MG Hull & Canopy
HW Seaking 180a ESC
HW Program Card
Castle 1515 2200kv Motor
Traxxas 2075 Servo
FlySky GT3-B Receiver
Gens Ace 5000mAh 40C 3S Lipo (x2)
Gens Ace 5000mAh 50C 2S Lipo (x2)

[jasoncyclone]

Hey guys, I've been very busy lately with work and family and have not had any time to work or play with boats...


Hey Ed, nice to see you found our little corner! You will be very happy with the CC1515 in your geico!!! I hope your not planing on running 6s on that motor??? 4S will be plenty!!! You'll see!
Mardon, I got the scoop hatch in my garage. How much do you want for it? If one of the guys on this thread does not want it, my buddy I run with has been eying it!!
Shawn, I finished putting the geico back together and she looks KILLER!!! I will post pics in a day or two..
Stephan, I can't believe how large those CC1512's are!!!

[skyman]

hello jason. pleasure to meet you.
i have those batteries because of the slash. if you say that 6S is too much then ok. but i might try it just for the heck of it

what should i buy next guys?

[HYDROJERRY]

well like Jason i havent had alot of time for rc's but i was able to get my Geico torndown and clear coated this weekend,, ive been wanting to do this sense i replaced all my decals with a set igot made from Monojeff awhile back so now i can let her cure afew days and reinstall my gear and get her wet again this coming weekend ps the reclear looks sweet only afew little problems but nothing im worried about..And ive got my old 32'' deep-v back together just gotta finish my hatch locks and she'll be ready to go also!!!

[macdon]

Mardon, I got the scoop hatch in my garage. How much do you want for it? If one of the guys on this thread does not want it, my buddy I run with has been eying it!!

If no one in this thread likes it, then its yours for $50 bud! Do take into consideration that it is the only one in existence, so definitely a one off! Enjoy!

Also, hit me up on a pm when you have the time and hopefully we can continue with discussing my FE stuff for sale. I think you will love my new offering as I'll be unloading most if not all.

[srislash]

Jason,glad to see you checked in,we were curious.I'd let your buddy run that scoop canopy.Now for the paint for it eh.LOL

Ed,6s? Don't do it!!!

[tagasagwan]

Hey guys, I've been very busy lately with work and family and have not had any time to work or play with boats...


Hey Ed, nice to see you found our little corner! You will be very happy with the CC1515 in your geico!!! I hope your not planing on running 6s on that motor??? 4S will be plenty!!! You'll see!
Mardon, I got the scoop hatch in my garage. How much do you want for it? If one of the guys on this thread does not want it, my buddy I run with has been eying it!!
Shawn, I finished putting the geico back together and she looks KILLER!!! I will post pics in a day or two..
Stephan, I can't believe how large those CC1512's are!!!

Hey nice too see you back Bud! Well, why don't you try those 1512's on the ekos just for kicks! Hehehe! Keeping that boat on water is not guaranteed! Hahaha!