Vac-U-Pickle

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • boredom.is.me
    Senior Member
    • Jun 2009
    • 595

    #76
    I can't believe I haven't posted any decent video yet. A friend took a short video yesterday. It is uploading to youtube now.
    I also built a new stand for it.

    Comment

    • boredom.is.me
      Senior Member
      • Jun 2009
      • 595

      #77

      Comment

      • boredom.is.me
        Senior Member
        • Jun 2009
        • 595

        #78
        I'm looking to get a little extra out of this setup by switching the prop. Right now, I am running a 42mm 1.4 pitch cnc prop from Kintec. My motor and ESC run cool. The batteries are a little warm, but not alarming in any way. I was thinking about dropping back down to a 40mm prop, but with 1.8 pitch. That would take it from 58.8mm per revolution to 72mm. The one below is advertised as a no lift prop. Any advice?

        Comment

        • boredom.is.me
          Senior Member
          • Jun 2009
          • 595

          #79
          new flex shaft
          new coupler
          new drive dog
          new bullet nut
          new prop X642 B/S from Rocket City Racing (OSE was out)

          Comment

          • boredom.is.me
            Senior Member
            • Jun 2009
            • 595

            #80
            I got to run with the new prop. The first session left me stranded after a blow over. Since then I got an inflatable boat for $25 and an oar for $12 from Walmart.

            The second session was really rough so I couldn't get any useful assessment. It is a lot more sensitive to torque on throttle, but that could be the changed strut position. I also managed to brake the joint between my linkage rod and the ball link. I have a proper linkage in the mail.

            Comment

            • boredom.is.me
              Senior Member
              • Jun 2009
              • 595

              #81
              Hey everyone, this has been sitting for too long so I'm putting it up for sale. I could really use the money to pay off some stuff.

              FS thread coming soon...

              Comment

              Working...