4 Prop Conquest build

[Xfactor]

When I was just out of high school and heavy in to car audio (I worked for an auto sound company) I was able to see (and hear) Alma Gates PPI sponsored Bronco with 64 10" subs and 32 amplifiers, approx 40+kW of power, at that time it had already set the SPL record at 162.9db. UNREAL!

Jay lovelace Down here in NC is my boy ever heard of him? I also have been doing car audio for over 20 years. I can say this spl vehicles are about the only ones where you see way more power than these boats do. I mean ive yet to see a car amp with a 300 amp fuse in it. I mean 50 volts @ 200-300 amps is nothing to slight.Jay won the worlds with 16 strokers a mmatts amps back when he did it. Im a JL /Hifonics freak series 8 and 7 the zed audio stuff not the well u know what it is.The pioneer stuf is impressive too.

[Xfactor]

You cant sit and listen to a vehicle with 162.9 db youre getting to where you couldnt breath out.U must have been outside to listen for sure. Never cared much for a loud burp. I always liked sq myself. Big USD fan I even have two pairs of waveguides here now.Later this summer im goint to do a sick av install on my 83 245 intercooled turbo volvo wagon.It damn near race ready. O ringed ,blueprinted, custom pistons hybrid turbo the works. Hopefully u guys will catch it on another site.

[crabstick]

I don't care how short anyone makes the wire, if the connections are not 100% my setup will be faster with longer wires

Fully Agree..

[rearwheelin]

I'm looking for a simple way to add lipo packs to my system , my thought is a gold plated grounding bar . Is there anything like that in audio world ?

[Jeepers]

You cant sit and listen to a vehicle with 162.9 db youre getting to where you couldnt breath out.U must have been outside to listen for sure. Never cared much for a loud burp.

I was standing outside the Bronco with ear protection. it was more like BUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUUUUUUUUUUUURP!!!!! LOUD!

short clip of it in its Kicker form that I found on you tube.

http://www.youtube.com/watch?v=2KJQC_OeNQA

[rearwheelin]

Has anyone found boats on youtube powered by castle monster motors ? this is the onlyone I could find ( didn't look real long )http://www.youtube.com/watch?v=Izme-EnqCaI

[Make-a-Wake]

Any news here?

[Rumdog]

Castle boat

Has anyone found boats on youtube powered by castle monster motors ? this is the onlyone I could find ( didn't look real long )http://www.youtube.com/watch?v=Izme-EnqCaI

Here is my twin sprintcat. Twin Neu/Castle 1515 1y's on 5s with x442"s. Also ran x447's same setup was in the mid 70's.http://forums.offshoreelectrics.com/...ad.php?t=14659

[rearwheelin]

Here is my twin sprintcat. Twin Neu/Castle 1515 1y's on 5s with x442"s. Also ran x447's same setup was in the mid 70's.http://forums.offshoreelectrics.com/...ad.php?t=14659

That is bad a$$ ...

[rearwheelin]

Paint is allmost complete

Stopped by the paint shop today to check out the base coat . Going to get some light purple pearl gost flames and some details to make it more scale looking.

[blackcat26]

Looks damn good bro! Love the color

[izzy7771]

rearwheelin you are my new idol. you could prob pull a water skier with your boat. lol.
cant wait to see this with 4 1515s. i think will be just ridiculously fast.
may be a stupid question but all i see are twin drives and now quad drives from (the man aka rearwheelin) but would a tri-drive work??? 1 on each side and 1 center??
ps rearwheelin i envy your skills!!! boat looks amazing!!!
thanks
izzy

[rearwheelin]

rearwheelin you are my new idol. you could prob pull a water skier with your boat. lol.
cant wait to see this with 4 1515s. i think will be just ridiculously fast.
may be a stupid question but all i see are twin drives and now quad drives from (the man aka rearwheelin) but would a tri-drive work??? 1 on each side and 1 center??
ps rearwheelin i envy your skills!!! boat looks amazing!!!
thanks
izzy

LOL ! Thanks for the coment , I'm only determined to build my idea, the truth told there are many more talented builders than myself, I only threw my idea together with the best of what I know and tried to think every aspect of it threw before I started the build. I am very pleased with the results
The tri drive was considered but opted for a more balanced boat. It might do really well on a oval but doubt a twin, quad or a tri would ever out corner a single. I will give it a shot though with the quad though.

[rearwheelin]

Paint is done !

Need to clean it up with some aceton and pick up my polished hardware from a good friend, ( who also sharpend & polished my props) thanks Brian ! Hoping to get it in the water sometime in the next month.

[Brushless55]

Need to clean it up with some aceton and pick up my polished hardware from a good friend, ( who also sharpend & polished my props) thanks Brian ! Hoping to get it in the water sometime in the next month.

Looks killer man!