What is the deal 43MPH still?!?!?!?!?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • traeside
    Senior Member
    • Aug 2012
    • 190

    #46
    okay i am placing an order and i wanted to replace my 642 but they are out of stock, is the GrimRacer Metal Prop 42mm Diameter x 66mm Pitch pretty close? I still have the 645 but still not sure about that much prop. Last run out I spun the dog drive so I did not get much run time. my new 5300 60C packs are in so I hope that helps even with the stock setup over the 5000 45C

    Comment

    • MAMBA2200
      I need a scooby snack
      • Jul 2012
      • 1202

      #47
      in my old spartan i ran the seaking 180 with a castle motor and a prather 220 prop and ran in the mid to upper 60's consistently
      Im Only Responsible For What I Say Not For What You Understand

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #48
        Originally posted by MAMBA2200
        in my old spartan i ran the seaking 180 with a castle motor and a prather 220 prop and ran in the mid to upper 60's consistently
        Really? I'd like to see a Spartan doing upper 60's..............stable?? I have seen so many Spartans run like they are gonna flip onto the side is why im asking. Any vid of it?
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • MAMBA2200
          I need a scooby snack
          • Jul 2012
          • 1202

          #49
          here you go
          Im Only Responsible For What I Say Not For What You Understand

          Comment

          • traeside
            Senior Member
            • Aug 2012
            • 190

            #50
            The only way hits 60 is in the trunk of my car on the way back from the lake. Lol

            Comment

            • traeside
              Senior Member
              • Aug 2012
              • 190

              #51
              I am mobile so I can't see the link. What does it look like make awake?

              Comment

              • Make-a-Wake
                FE Rules!
                • Nov 2009
                • 5557

                #52
                I'm at work and the youtube link is blocked............
                NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                Comment

                • traeside
                  Senior Member
                  • Aug 2012
                  • 190

                  #53
                  Okay I will have a look when I get back to the office. Mamaba2200 what kv were you running?

                  Comment

                  • MAMBA2200
                    I need a scooby snack
                    • Jul 2012
                    • 1202

                    #54
                    2200
                    Im Only Responsible For What I Say Not For What You Understand

                    Comment

                    • traeside
                      Senior Member
                      • Aug 2012
                      • 190

                      #55
                      See I am 1430 so that's why they had me go to the 645

                      Comment

                      • traeside
                        Senior Member
                        • Aug 2012
                        • 190

                        #56
                        Very impressive, that thing is hardly in the water and it is bouncing straight up and down no chine walk at all!!! Very nice lake and song selection . Did you every have a chine walk problem and if so what solved it?

                        Comment

                        • MAMBA2200
                          I need a scooby snack
                          • Jul 2012
                          • 1202

                          #57
                          yes i did just fine tuning the trim tabs and make the bottom of the ridgid that was the v1 hull my v2 hull was easier to tame i have other vids of it in the 60's also that cc1515 had alot to do with it getting those speedsbut that motor was a no no on 6s from what i hear but it worked good for me
                          Im Only Responsible For What I Say Not For What You Understand

                          Comment

                          • traeside
                            Senior Member
                            • Aug 2012
                            • 190

                            #58
                            what rudder is that? and on the V2 do you know where you have the tabs set? i have gone all over the place with mine and not only can i not get it over 43 but it walks all over the place.

                            Comment

                            • MAMBA2200
                              I need a scooby snack
                              • Jul 2012
                              • 1202

                              #59
                              Its a dual pickup rudder from kintec it was longer than stock that stabled it out also to be honest the tabs wasnt even touching water at speed

                              Sent from my DROID RAZR using Tapatalk 2
                              Im Only Responsible For What I Say Not For What You Understand

                              Comment

                              • traeside
                                Senior Member
                                • Aug 2012
                                • 190

                                #60
                                i am willing to try anything at this point, i mean i went from stock 6s with 215 to the 4090 1430 with a 645 moved the batteries all the way end to end and still the same speed?!?!? i do think my batteries were not up to snuff but i got new ones but i have not had a chance to try them.

                                Comment

                                Working...