Your MG that started off as a hull

[HYDROJERRY]

I was thinking of just alittle sanding the the middle to bring down the sides for alittle better fit,, we can talk about it in pm's/

[tagasagwan]

Mac has a a Geico T-shirt That he had custom made. Haven't you guys seen it yet? I'll look for a photo or a video were Mac used it.

Does anyone have a coupon for Gizmo? I need to buy replacement parts for my Zenoah g260PUM that blew up last Sunday. Grrrrrrrr!

[tagasagwan]

I was thinking of just alittle sanding the the middle to bring down the sides for alittle better fit,, we can talk about it in pm's/

That's okay Bud! You guys can talk about anything on the board. At least we can also benefit from those infos. Hehehe!

[tagasagwan]

Re-posting this guys!

hi guys! Sorry for this is way out of topic. Can anybody direct me where i can get a wind turbine generator with controller that can supply 200w-300 of power continuously for 12hours a day? Probably i need something that has more than 200w capacity to sustain the 200w power requirement. These are also known as windmill power generators. The cheaper the better! Thanks!

I emailed one company Missouri Wind and Solar LLC at http://www.mwands.com/ but, they never replied to my inquiries!

[srislash]

We've only got one of them wind turbines up on the local ski hill.They keep talking about setting more up but I think this is a pricey venture.

You trying to power the shop Stephen?

[tagasagwan]

We've only got one of them wind turbines up on the local ski hill.They keep talking about setting more up but I think this is a pricey venture.

You trying to power the shop Stephen?

Nope! it's for my Aunt. They always get power interruptions in the province and it affects her lottery outlet operations. That's why she needs a reliable back-up power source and it's so windy in her area plus we can install the wind turbine at the rooftop of her 3 storey building.

[tagasagwan]

We've only got one of them wind turbines up on the local ski hill.They keep talking about setting more up but I think this is a pricey venture.

You trying to power the shop Stephen?

Nope! it's for my Aunt. They always get power interruptions in the province and it affects her lottery outlet operations. That's why she needs a reliable back-up power source and it's so windy in her area plus we can install the wind turbine at the rooftop of her 3 storey building.

[skyman]

what's up everyone? just dropped in to say hello... i was having a delicious haagen dazs ice cream bar and i thought of u guys

[macdon]

Apologies guys - I know its been a few days since I last posted. Been busy since last week.

Anyhow, I made a cabin for the fun cruiser. After discussing with Stephen and getting inspired by one of our fellow boater who had his apache funboat made with a cabin - I thought I'd do the same for my fun cruiser funboat. Its like a 2-in-1 boat - lift off the cabin and run it like an offshore racer or put on the cabin and run it like a scale-ish yacht! Its all what funboats is all about, eh?

[opluna]

Nice, good job MAC

[tagasagwan]

what's up everyone? just dropped in to say hello... i was having a delicious haagen dazs ice cream bar and i thought of u guys

I want some bud!

[macdon]

Nice, good job MAC

Thanks master!! :)

[HYDROJERRY]

Now thats cool Mac,, looks way better like that..can wait to see that painted!
Finally some poeple to talk to, i was begining to think i had bad breath or something!!hahaha
so if you guys have read up i bent my mg rudder bracket back to normal but lost the little bolt that holds the pushrod to the rudder any ideas how to fix it, i have some tinny bolts but they are still just a hair to big, wont fit threw the hole if i grind off the threads they'll fit but then not threads to put a nut on!!

[srislash]

Now thats cool Mac,, looks way better like that..can wait to see that painted!
Finally some poeple to talk to, i was begining to think i had bad breath or something!!hahaha
so if you guys have read up i bent my mg rudder bracket back to normal but lost the little bolt that holds the pushrod to the rudder any ideas how to fix it, i have some tinny bolts but they are still just a hair to big, wont fit threw the hole if i grind off the threads they'll fit but then not threads to put a nut on!!

I have been successfully drilling out the round brass on the endlink for my FC Jerry.Just pop it out and gently use vice-grips to hold the ball.Then drill.

That cabin looks sooo good Mac.

[srislash]

Now thats cool Mac,, looks way better like that..can wait to see that painted!
Finally some poeple to talk to, i was begining to think i had bad breath or something!!hahaha
so if you guys have read up i bent my mg rudder bracket back to normal but lost the little bolt that holds the pushrod to the rudder any ideas how to fix it, i have some tinny bolts but they are still just a hair to big, wont fit threw the hole if i grind off the threads they'll fit but then not threads to put a nut on!!

I have been successfully drilling out the round brass on the endlink for my FC Jerry.Just pop it out and gently use vice-grips to hold the ball.Then drill.

That cabin looks sooo good Mac.