Your MG that started off as a hull

[HYDROJERRY]

Mac do you still have the hatch with the fin on it i saw another guy on another thread asking for one, i pm'ed him and said i no aguy but its up to you,, maybe get one sold for ya..

[macdon]

Mac do you still have the hatch with the fin on it i saw another guy on another thread asking for one, i pm'ed him and said i no aguy but its up to you,, maybe get one sold for ya..

Its actually with Jason in Cali - kindly give him a buzz.

[srislash]

Mac do you still have the hatch with the fin on it i saw another guy on another thread asking for one, i pm'ed him and said i no aguy but its up to you,, maybe get one sold for ya..

Yeah Indy is thinking on it,unless you have found another one Jerry.They will get out there Mac. I gave Indy a link to this thread as a contact for the turbine canopies too.

[srislash]

Eeek, i just saw your reply Srislash, i waxed it this morrning before i started putting her back together, hope it dosent screw up the paint. Well threw out the day i put her back together here and there so im almost done heres some pics..

I only wait for the clear to harden man.I use the U-POL #1 and a thick coat stays soft for a while.

[HYDROJERRY]

O, ok Jason,, i us the rustolium clear enamel gets hard pritty quick if you spray on a hot day, very touchable after a day so maybe it will be fine and yeah Indy's the one i was talking to..i havent tryed the UPOL yet, to expensive i get the rustolium for about 6.00 a can..

[HYDROJERRY]

Ok so im kinda a nut about things,,, anyone no where i can get a Miss Geico shirt or some appearal,, ive seen the watch for 2,333.00 but umm i cant afford that,hahaha id take out a lown but my wife would kill me

[srislash]

Ok so im kinda a nut about things,,, anyone no where i can get a Miss Geico shirt or some appearal,, ive seen the watch for 2,333.00 but umm i cant afford that,hahaha id take out a lown but my wife would kill me

Maybe Scott or one of the other Fla guys could find one.Way more Offshore stuff down there.

[HYDROJERRY]

Yeah i hear that,, been hunting on google and can only find the regular geico stuff or geico fox racing stuff.. just pm'ed Indy back and we'll see what he does i told him to get with you guys on the hatch..

[srislash]

I wonder if I should take a whack at the Geico colour match thing.I have painter buddies.You never know when this different country thing could be a benefit.Could be slight differences in products.

[HYDROJERRY]

Try man,, once i get my genesis back together and start on my hatch im going to try my lexan paint, seems the only thing close that i have, maybe on top of white primer it will be close enough for me...the thing that sucks to me is then you gotta clear it and even that makes the color darker, so freshly painted it maybe perfect then the clear makes it different, that sucks..

[IndyHobbies]

Ok so im kinda a nut about things,,, anyone no where i can get a Miss Geico shirt or some appearal,, ive seen the watch for 2,333.00 but umm i cant afford that,hahaha id take out a lown but my wife would kill me

I've been looking too. Its a no brainer that it would sell if they made it. Especially if they made it with the gecko on it.

Can't find anything either.

[IndyHobbies]

I airbrush R/C car bodies on the side. I compared one I did with Faskolor neon yellow. It was close, but needed some neon green to get it closer. But, i think you could get a pretty close match.

http://www.shopatron.com/products/productdetail/FASFLUORESCENT+YELLOW/part_number=40101/137.0.1.1.6089.5975.0.0.0?pp=15&

Faskolor paints are not water proof long term. So you would need to put a final coat on using Rustoleum Crystal Clear. I use that and its good stuff. Never yellows, flows well and dries pretty quick.

[HYDROJERRY]

Yeah i have a bottle of somekinda lexan paint but not at home and dont remember what brand but its in a small glass bottle not a plastic one and looks pritty close ill post a pic of it when i get home..

[HYDROJERRY]

Ok new question,,, can fiberglass be worred back straight, like maybe set in the sun with waits pressing on where you want it bent???

[srislash]

You may be able to do that but add some glass to the backside to hold it.