ML Boatworks RSX380 Outrigger! My first FE wood kit build...
Collapse
X
-
Finally! Breaking the 100 mph mark! It's been a goal of mine for about four years. Sometimes I wouldn't admit it. When it felt unreachable. Today was a good day!
Sent from my SM-G950U1 using TapatalkComment
-
-
Your welcome. It's good to share experience and ideas, we all benefit when that happens. I learn so much this way too. Paul has also been a great help to me...
I have a little bit of white K & B Super Poxy paint that I used for many years(wasn't enough left for this project and I had no other colors). So I bet your 2014 Klass Kote is still good. Test a small mix to see if it hardens.
Here's a tip on brushing the Klass Kote. It says to let it activate in the cup for 30 minutes before using. I found it would not flow as well towards the end because brushing takes longer. I've been getting great results waiting 20 minutes, then I start using it. It flows better and hardens the same.
I'm using these 1" wide & 1/2" wide bristle brushes from my hardware store. They are around a dollar each. They work great, then I toss them...
Sent from my SM-G950U1 using TapatalkNortavlag Bulc
Comment
-
I set a new personal best pass with the RSX 380 this year. And on a very short run...
Sent from my SM-S916U1 using TapatalkComment
-
I set a new personal best pass with the RSX 380 this year. And on a very short run...
Sent from my SM-S916U1 using TapatalkSteven Vaccaro
Where Racing on a Budget is a Reality!Comment
Comment