First build... Cheap boat, lots of power

[masonis1]

.

Not in this pic u didn't

What didnt i do?

[TheShaughnessy]

Sand down the little plugs the stock stand fit into.

[masonis1]

Look... I filled them... Look at my older pics of when I was prepping the hull

[LarrysDrifter]

You can try Mark Twain. I know for a fact they have props, but they are raw and most are for gassers. They wont have anything in the size your looking for. Schafers has props, but again only raw. Checkered Flag, no props at all. No hobby shops round here have non metal props. I think I may have one or two plastic or carbon filled you can have, but im unsure of the bore on them. What size stub shaft do you have? No, that wasnt a perverted question!
Thanks, Make A Wake. Suckmywake restored it and did a fine job. I just finished it a bit and use it to cut the grass. Im the only guy in the neighborhood mowin with a classic Cub Cadet made by International Harvester. The rest of them use the made by MTD throw aways. Mine still runs strong. The engine is as came from the factory in 1970.

[masonis1]

Mark twain has a ok selection, i hate shaefers and will never go there unless i truely have to... They are closer to me than anybody but checkered flag is my favorite but clearly not for boats... Ill call mark twain and see what they have... Im un sure what size shaft i have... Zac, do you remember?

[izcain]

3/16" prop shaft

Make sure you get some lube for that cable before you run that thing mason!

[masonis1]

I have some lubrication spray. Its in a red spray bottle from OSE. Would this work?

[izcain]

I thought about sending you a prop with all this since I have a couple of carbon props that would have worked great but I thought I heard you say that you had some props. Maybe that was someone else saying it.... I dont remember

[srislash]

The cable is a big maintainence thing Mason.I pull mine out and dry it clean it and relube after every day out.If it is allowed to sit the metals in the cable will corrode.

Sorry bud,I had to go out with the boat.The big glowing thing in the sky was calling me out.Got vid http://www.youtube.com/watch?v=HiXWD...=youtube_gdata

[masonis1]

I thought about sending you a prop with all this since I have a couple of carbon props that would have worked great but I thought I heard you say that you had some props. Maybe that was someone else saying it.... I dont remember

I said that. Got the props today, they are too small... Anyone maybe want to trade. I would have to findout what size they are.

[masonis1]

I will do that..

[izcain]

Shawn that thing is rippin pretty good.

I went out in search of good water to really open up the daytona today but couldn't find any water that was decent. Maybe tomorrow I will have better luck

[masonis1]

Ok both of you are making me jealous

[izcain]

lol looks like you are almost there!

[masonis1]

Just a couple odds and ends