Larrys 32" twin cat

[bigpapa]

ben we all apperciate all you are doing

[LarrysDrifter]

Doing my best.
I may have to fly to China to get them!

I wasnt saying that out of aggravation,just saying in general.Its not a big deal.I have a mono I have to do next anyway.I know you have no controll over china man and his making of parts.I hope your rc sales are starting to pickup.

[LarrysDrifter]

I was going to run the X442's today after work,but had to work late.Have to wait for another day.I also have to flip the gps around in the hull because one of the esc wires was against the power button on the gps.I think it shut of pre-maturely.It wasnt breaking any speeds in the video,but I think it was a bit faster than 53mph.Or Im just being impatiant.

[ray schrauwen]

I mentioned before the line ups to get CNC work done in China, they are busy.

[LarrysDrifter]

Your prob right.Im not complaining though.Ben has been a fine seller even before he started selling the FighterCat boats.I know hes good for the stingers.If I had more money,Id buy alot more from him just to help him out.

[bigpapa]

was not ment that way larry i know you were not complaining and you are correct about ben nuttin but good dealings with him

[LarrysDrifter]

was not ment that way larry i know you were not complaining and you are correct about ben nuttin but good dealings with him

I know.It wasnt meant for you.I was saying it for Ben because hes a good guy.

[richt]

can some one help me . i have a king of shave cat i looking for a good situpi for a twin can some let me .

[LarrysDrifter]

Look in the Venom threads.Theres a lot of info there on set ups.

[shannon87]

hi larry nice work i was just wondering how its goin as i pretty much want the same set up in my fightercat hope its goin good for ya and with those arc motors bein outrunners how did ya use jackets sorry about the question if it souds silly im jus all new to this cheers

[LarrysDrifter]

The Arcs are inrunners.might get to run this weekend.

[ray schrauwen]

I hope so. I have a pair of those in my work room but, now instead of a 32" cat I have a 36" one on the way. Hopefully these units are up to that task, I would think so...

[shannon87]

hi larry cheers my mistake gotta love bein a noob lol cant wait to see the vid

[LarrysDrifter]

There is a video posted on page 2.
Ran today on glass smooth water and got 64.2mph.Still dissapointed.One of the wire drives is rubbing the stuffing tube,causing friction.I need to get this fixed and I think it will pick up a few mph.Its running X442's now and motor temp was very low.No temp gun (battery dead),so I finger tested it and could hold my finger on untill I got tired of standing there.
This coming week,Im going to try and get my X447's sharpened and balanced and try those too.Im confident these motors will turn them with no sweat.They might be a bit big for the hull,but we ll see.

[keithbradley]

There is a video posted on page 2.
Ran today on glass smooth water and got 64.2mph.Still dissapointed.One of the wire drives is rubbing the stuffing tube,causing friction.I need to get this fixed and I think it will pick up a few mph.Its running X442's now and motor temp was very low.No temp gun (battery dead),so I finger tested it and could hold my finger on untill I got tired of standing there.
This coming week,Im going to try and get my X447's sharpened and balanced and try those too.Im confident these motors will turn them with no sweat.They might be a bit big for the hull,but we ll see.

If the hull can stay planted, I think the x447s will make a big difference (as long as those motors are up to turning them). I tried x442s and x447s on my smiths cat and there was a big difference. Even at lower RPMs it seemed fast with the x447s.
They are big for a 32" hull, but if it stays in the water it should be killer. Im excited to see how it turns out!