New P-mono Seaducer build

[sailr]

First I would need a Seaducer hull to work with! Anybody want to donate one?

[Chuck E Cheese]

in that case i'll make the hatch... just send me one of each size and i can start work..

[Chuck E Cheese]

ohhh ya, i'm gona need hardware too so i can make sure the hatch doesnt interfear

[LarrysDrifter]

The 1st pic in post 71 is sweet!Nice looking boat.

[egneg]

The boat came wit a piece of 1/16" Lexan that sits in the lower lip of the hatch opening. It was a little too flimsy for my liking so I replaced it with some 1/8" smoke Lexan. It' will be a bit of a PITA to tape with the multi levels and curves. But I dont think it will be much harder than my sons old Mean Machine.

Here are a few pics of the lid on Andym and Doug Smock's 'ducer. On the Trapshooter, it doesent look like there is a lip that runs down the length of the opening to support the lid. Dont know if it's the photo or Doug used black tape but as you can see on post #61 there is a lip mine. BTW- If you tell Jerry it's for an electric boat when you order, he may build you one in glass. Get the CF!!

looks like Doug used some closed cell foam to help seal the boat.

[carlcisneros]

Hey Mike;
The little DF 26 is ready to go.
The Insane twin mono is getting there. The the equipment all marked out for mounting.
Doing up the batteries and ESC/motors (connectors and such) here in a couple days, Then I start drilling the transom and mounting things inside.

Still haven't started on the 37 twin cat yet. LOL

[Doug Smock]

looks like Doug used some closed cell foam to help seal the boat.

Yes sir. That is foam wing saddle tape.
D.

[Chilli]

Better get moving Carl. The weather man says the Jet Stream's pattern is going to start changing in a few weeks bringing us milder temps toward the end of the month.

[HOTWATER]

I like the idea of using smoked lexan....clear lexan or plexi condensates pretty quickly...Nice!

[Chilli]

It should also keep the interior a little cooler and the extra weight will help me keep the CG back.

Three guesses where I got it and the first two don't count....

[HOTWATER]

mcmaster carr, mcmaster carr and mcmaster carr.......

[carlcisneros]

Lowes?

[Chilli]

Hotwater wins!!!!

His prize will be a free roostertail wash down for his Rico at the first District this year.

[egneg]

Sorry I told you guys about my secret 1 stop shopping place.

[HOTWATER]

Hotwater wins!!!!

His prize will be a free roostertail wash down for his Rico at the first District this year.

Thanks!! I'll make sure I have new wiper blades installed!