47" twin mono to one outdrive build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jacked1
    Senior Member
    • Jun 2010
    • 772

    #76
    OHH CRAP! I took the adress from the wrong tab! I fixed it!@

    It would have to be really reallly windy for that one to work!
    Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

    Comment

    • Jacked1
      Senior Member
      • Jun 2010
      • 772

      #77
      All the parts are here! My dad never got me the aluminum but i should have it alllll ready on monday or tuesday!
      Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

      Comment

      • z400
        Fast Electric Addict!
        • Apr 2007
        • 1311

        #78
        Sweet!!

        Dont forget the camera
        Z
        KBB34" Mono - Fast
        ToySport Triton- Not as fast

        Comment

        • Jacked1
          Senior Member
          • Jun 2010
          • 772

          #79
          Looks like tuesday for the first run! Just got done making the twin motor mount and it turned out pretty good!
          but need to charge up amm my 8 billion 2s batteries still!
          Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

          Comment

          • Make-a-Wake
            FE Rules!
            • Nov 2009
            • 5557

            #80
            Looking forward to the run Jared!!!!!
            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

            Comment

            • Jacked1
              Senior Member
              • Jun 2010
              • 772

              #81
              So this might get delayed again, i just found a 10 morgan silver dollars in my grandas old stuff from the 1800's that have (the really really really rare ones) been sold for 100,000 bucks each so i might be side tracked for a day of two! I might get a jackpot on one of them and get to build my dream boat if one is over a grand!
              Last edited by Jacked1; 08-23-2010, 10:27 PM.
              Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

              Comment

              • Jacked1
                Senior Member
                • Jun 2010
                • 772

                #82
                Everything is ready! Except i can't find any mounting screws for the motors so i am going to go to fastenall and lowes tomorrow to see if i can get some without ordering any!
                Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                Comment

                • Jacked1
                  Senior Member
                  • Jun 2010
                  • 772

                  #83
                  Motors and mount!! (camera batt died while taking 2nd pic)
                  Attached Files
                  Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                  Comment

                  • z400
                    Fast Electric Addict!
                    • Apr 2007
                    • 1311

                    #84
                    Mounts look good!!!


                    ETA to the pond?
                    Z
                    KBB34" Mono - Fast
                    ToySport Triton- Not as fast

                    Comment

                    • Jacked1
                      Senior Member
                      • Jun 2010
                      • 772

                      #85
                      Thanks! tomorrow or friday i hope, i have been VERY busy lately and the stupid screws to hold the gears to the hubs are 5-40 size and they are impossible to find on planet earth or i could have ran it tonight SOOOO i am going to re tap them at work tomorrow to 6-32 so i don't have to order them from Mars.
                      Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                      Comment

                      • Jacked1
                        Senior Member
                        • Jun 2010
                        • 772

                        #86
                        Here are some more pics and i got rid of that $1 tupperwear that was in there since i know the hull is water tight now. And added the antena from my villain!

                        It needs cleaned!
                        Attached Files
                        Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915

                          #87
                          Very interesting idea, I did not get a chance to read all of it but scanned most. The problem we had with the big motors and the gears was wear on the gears under load. a good belt drive would help a lot, but must have good Kev belts.
                          I really wonder about the sinkcronizing (sp) of the motors.

                          I do not have much time now getting ready for a trip on the Rubicon this weekend.
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                          Comment

                          • Jacked1
                            Senior Member
                            • Jun 2010
                            • 772

                            #88
                            Thanks! Yea i am really hoping it will work! I got the gears as big as i could fit. If the gears wear down too fast i am going to put them inline on a single shaft and get a smaller prop.
                            First run should be tonight!

                            Have fun on your trip!
                            Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                            Comment

                            • Jacked1
                              Senior Member
                              • Jun 2010
                              • 772

                              #89
                              Everything is in there and did some bench testing! I went up and down on the throttle 10 times and the dears and esc's and motors are alll good!! I AM SOO EXCITED! The motors and those gears and the type of fiberglass in this hull is SOOOOOO loud! Louder than my old homelite powered bonzi with a loud pipe.
                              Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                              Comment

                              • Jacked1
                                Senior Member
                                • Jun 2010
                                • 772

                                #90
                                Attached Files
                                Fleet: 55" Quad inline T600 Cigarette boat, Twin Mean Machine, Twin T600 47" mystery mono, 4082 Surge Crusher, 1717 8s Genesis, 4074 Villain, "mini mono", 52" Bonzi, Prather Funcruiser, 2 DPI 3.5cc tunnels, 5' Styrofoam recover barge

                                Comment

                                Working...