t 180 with giant power 6000 2s in series neu 1515 2200
TFL Hobbies "Popeye" Hydro: P-Sport Hydro
Collapse
X
-
Wow, Ray! Thanks! This is great info!TFL makes mostly D wind motors and the 4D they sell is 2000KV. It's most likely a D wind.
These are most likely the specs:
SSS 3674 4 pole 2075kv motor. Come with aluminum billet water cooling jacket. Motor mount not included.
Type: 3674
KV: 2075
Y/D: 4D
Max Amp (A): 82
Max Volt (V): 29
Max Power (W): 2400
Max RPM: 60K
Non Load Current (A): 2
Shaft Diameter (mm): 5
Motor size diameter x length (mm): 36*74
Gross weight (g): 320
I want to put one in my MG, was very disappointed with the Aqua Craft 1800KV, brand new and burned during the first run, boat was running a M445, the wires just melted together.
Anyway, motor is on its way and I hope it will last more than one run!
Too many boats, not enough time...


Comment
-
temps were barely warm at all water temp is still cool though...
if the new motor doesent do well try the pb 1800 this is mine with a m445 and a t120 esc https://www.youtube.com/watch?v=Vd3a9y915VkMY RETIREMENT PLAN?????.....POWERBALL
74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...
Comment
-
-
Comment
-
Ron, looks like you got it running real nice, I got mine running pretty decent too. When you get back down here we gotta compare notes..
Comment
-
ya chris can do....the 6000ma giant power batts are 7 and 3/4 inches long and a few oz's more so it keeps the nose down nowMY RETIREMENT PLAN?????.....POWERBALL
74 vintage kirby clasic hydro, pursuit mono, mg, 47'' mono, popeye hydro...
Comment
-
That is what I have now, just curious with a slightly higher kv and long can what it will do.temps were barely warm at all water temp is still cool though...
if the new motor doesent do well try the pb 1800 this is mine with a m445 and a t120 esc https://www.youtube.com/watch?v=Vd3a9y915Vk
Too many boats, not enough time...


Comment
-
Hey Tim,
I think that TFL motor is what come in the stock HK Pursuits at one time.
Do you have any pictures you can post of it ?
Also what timing are you using on the NEU motor and what motor is it ?Last edited by lenny; 03-20-2014, 09:23 AM.Comment
-
Hey Guys... It may have already been mentioned, but I haven't read this whole thread...
What does the Popeye hull weigh bare?
Thanks,Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
How is the temp on the Neu, mine runs a bit too warm,
? ONLY IF THEY WORK 
Comment