Your MG that started off as a hull

[srislash]

interior 001.jpgThere is my 180 Macdon.I hung the caps off the wood rail toward the sponson and the plastic mount through the slot in the front towards the motor.I then used a dremel(you have a dremal,right) and carefully put a slot in the front bulkhead so that I could run a zip tie through to the original ESC location and around the 180 to hold it firmly in place.

[srislash]

Maybe you can make more out of these fresh pics.
180 005.jpg180 001.jpg180 003.jpg
I mounted it this way so that I can put a GPS in right behind the 180.

[ecoovert]

Man this is worse than facebook. Sometimes I forget to eat breakfast all on the count of you guys. If y'all weren't so talkative maybe I could get something done for a change. Well, on seccond thought I guess I keep some of y'all from gettin anything done also. Wouldn't give it up for the world. Merry Christmas Y'all.

[ecoovert]

Love that paint scheme on your Miss Behavin srislash.

[jasoncyclone]

Here is the pics of the T180 in the MG and a picture of most of my boat collection. Macdon, Here is the pipe that I will send you!!!
Pics 003.jpg
Pics 001.jpg
Pics 004.jpg

[macdon]

Here's mine - since we took out the wooden partitions inside so we could reinforce the hull, everything else is adhered straight down to the reinforced fiberglass floor.

I could probably relocate the receiver for the upcoming T180. On my 2nd pic, the current T120 is positioned in front of the motor.

[macdon]

Stephen (Tagasagwan) came over today and brought his 3 boats to be reinforced with fiberglass next week. In the pic, you can see him removing his running hardware so my fiberglasser could add fiberglass to the inside part of the transom.

My Lazer45 gasser is being prepped for a top coat. I still couldnt capture the right color of the boat in the pics.

[macdon]

Turbine Canopy Mold Done!

Here's the pics of the mold for the turbine canopy. The heat caused by the curing fiberglass melted the paint of the mockup - that is to be expected.
We will start making the first fiberglass product on Monday - first pulled will go to Jason!
I will show pics as we go along.

[srislash]

Love that paint scheme on your Miss Behavin srislash.

Thanks Eco,guess we may get to see just how good I can be with matching a new canopy.

[srislash]

Here's mine - since we took out the wooden partitions inside so we could reinforce the hull, everything else is adhered straight down to the reinforced fiberglass floor.

I could probably relocate the receiver for the upcoming T180. On my 2nd pic, the current T120 is positioned in front of the motor.

I had thought about putting the 180 in front of the motor but I think I didn't like the way the wiring would be.I'm trying to keep all leads short since I measured the difference with my logger.I cleaned up 2 volts in the ripple current by shortening the wires.Oops,I forgot you had taken the plywood out.How many pages ago was that?We may be bypassing Scott's threads here.

[macdon]

I had thought about putting the 180 in front of the motor but I think I didn't like the way the wiring would be.I'm trying to keep all leads short since I measured the difference with my logger.I cleaned up 2 volts in the ripple current by shortening the wires.Oops,I forgot you had taken the plywood out.How many pages ago was that?We may be bypassing Scott's threads here.

That was in page 2, reply #51. Posted 11/14/11 - a month and 10 days ago.

[macdon]

Here is the pics of the T180 in the MG and a picture of most of my boat collection. Macdon, Here is the pipe that I will send you!!!
[ATTACH=CONFIG]66434[/ATTACH]
[ATTACH=CONFIG]66435[/ATTACH]
[ATTACH=CONFIG]66436[/ATTACH]

Both stephen and I would be drooling at that pic of your boat collection! That pipe looks immaculate! Thanks!
You're in California, right? We just talked to a boating friend of ours who suggested a very good courier company that services a good number of Filipino communities in California, so Stephen will look into that to explore your boat offer to him. Fingers crossed!

[HYDROJERRY]

Hay Hay i thought i came up with the hole turbine thing!!! Just playin,, Jason can have the first one im kinda poor wright now till x-mas is over anyway. Man i think my MG is about the only simmy original one here, well not completly but in time im sure ill replace everything inside but for now is ok to me...Lets see i have replaced all the stickers and had Monojeff make me replacements, Turnigy 120a esc, 4s2p and m445 prop,, yep think thats it,

[tagasagwan]

Here is the pics of the T180 in the MG and a picture of most of my boat collection. Macdon, Here is the pipe that I will send you!!!
[ATTACH=CONFIG]66434[/ATTACH]
[ATTACH=CONFIG]66435[/ATTACH]
[ATTACH=CONFIG]66436[/ATTACH]

Nice Set-up on your MG. I love your collection. What are those two boats on top? the yellow and the blue? Those and the pro cat at the bottom are sweet! Drooling!!!!!!

[jasoncyclone]

The top boat is my Cyclone with a 35cc motor and the blue boat is a Thunderbolt with a inline twin 52cc motor in it. I have not finished the blue boat but the cyclone was my first gas build. That boat went upper 70's first time out. It kinda scared me at first. I have not ran a gasses for almost 1 1/2 years now....