The official 36" zelos twin modding thread

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • baller69
    Member
    • Aug 2016
    • 45

    #1726
    well ran things the best way i could with the room i had.reallly tight in there.once again this was a project just to see if this would work so haters stay clear.setup it two custom wound 1.5x4 cordova motors that r 2700 kv each running 8s each so 16s total and i am using a futaba radio 4pks-super r for good range all powered by thunder power batteries.i also have the 48 inch zelos running a 1650 lehner 3040 on 10 s waiting to also test this summer.WILL SUMMER HURRY AND GET HERE LOL!!!!!!!!!!!!!!!

    Attached Files

    Comment

    • Keagan-Z06
      Senior Member
      • Mar 2016
      • 970

      #1727
      Looking forward to see this
      Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

      Comment

      • Team Lucas
        Senior Member
        • May 2016
        • 300

        #1728
        Originally posted by fweasel
        Must be tough to keep track of your own boat!
        not when your in front
        Zelos 36 stock 68 mph

        Comment

        • Yellow
          Member
          • Jan 2016
          • 81

          #1729
          Looks good. +1 on...I cant wait for summer.

          Comment

          • Keagan-Z06
            Senior Member
            • Mar 2016
            • 970

            #1730
            IMG_3877.jpg

            IMG_3878.jpg
            Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

            Comment

            • stratus
              Senior Member
              • Dec 2016
              • 110

              #1731
              Originally posted by Keagan-Z06
              [ATTACH=CONFIG]149631[/ATTACH]

              [ATTACH=CONFIG]149632[/ATTACH]
              Are those 4050?
              Genesis 36", Zelos Twin 36"

              Comment

              • Keagan-Z06
                Senior Member
                • Mar 2016
                • 970

                #1732
                Sure is!
                Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                Comment

                • stratus
                  Senior Member
                  • Dec 2016
                  • 110

                  #1733
                  Nice nice,and kv? Im thinking of those also on 2100
                  Genesis 36", Zelos Twin 36"

                  Comment

                  • Keagan-Z06
                    Senior Member
                    • Mar 2016
                    • 970

                    #1734
                    IMG_3879.jpg

                    Just need to tidy up a bit now.
                    Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                    Comment

                    • ChevyPrerunner
                      Senior Member
                      • Jun 2015
                      • 205

                      #1735
                      Finally getting around to this project. Any recommendations on how to setup the fiberglass cloth and PT40 finishing resin before I do something wrong? Thinking of putting tape around the outside of the hills crack before laying in the glass and coating the rear.
                      Also just noticed the left side steering cable is frayed should I replace it or grease it up good and let it ride?

                      Thanks for any and all recommendations/tips.
                      Brian








                      Sent from my iPhone using Tapatalk

                      Comment

                      • Mxkid261
                        Senior Member
                        • Jun 2015
                        • 734

                        #1736
                        Originally posted by baller69
                        well ran things the best way i could with the room i had.reallly tight in there.once again this was a project just to see if this would work so haters stay clear.setup it two custom wound 1.5x4 cordova motors that r 2700 kv each running 8s each so 16s total and i am using a futaba radio 4pks-super r for good range all powered by thunder power batteries.i also have the 48 inch zelos running a 1650 lehner 3040 on 10 s waiting to also test this summer.WILL SUMMER HURRY AND GET HERE LOL!!!!!!!!!!!!!!!

                        Are those Ebay controllers?

                        Comment

                        • Mxkid261
                          Senior Member
                          • Jun 2015
                          • 734

                          #1737
                          Originally posted by ChevyPrerunner
                          Also just noticed the left side steering cable is frayed should I replace it or grease it up good and let it ride?

                          I would definitely replace that cable it looks like its ready to let loose

                          Comment

                          • kfxguy
                            Fast Electric Addict!
                            • Oct 2013
                            • 8746

                            #1738
                            Originally posted by baller69
                            well ran things the best way i could with the room i had.reallly tight in there.once again this was a project just to see if this would work so haters stay clear.setup it two custom wound 1.5x4 cordova motors that r 2700 kv each running 8s each so 16s total and i am using a futaba radio 4pks-super r for good range all powered by thunder power batteries.i also have the 48 inch zelos running a 1650 lehner 3040 on 10 s waiting to also test this summer.WILL SUMMER HURRY AND GET HERE LOL!!!!!!!!!!!!!!!

                            I can't wait to see this!
                            32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was

                            Comment

                            • Mxkid261
                              Senior Member
                              • Jun 2015
                              • 734

                              #1739
                              Isn't that like 60,000 rpm per motor? I'm sure interested to see what happens

                              Comment

                              • baller69
                                Member
                                • Aug 2016
                                • 45

                                #1740
                                Originally posted by Mxkid261
                                Isn't that like 60,000 rpm per motor? I'm sure interested to see what happens


                                me to LOL!

                                Comment

                                Working...