Powering up a 70" mono

[Gerwin Brommer]

Hm, could you tell me what a EPV like yours would cost ??

[Joern Markset]

Hm, could you tell me what a EPV like yours would cost ??

I have no idea, but if you give Conny Hertz a touch by e-mail he will respond. [email protected]

[Ub Hauled]

I guess you will find these props pretty hard to pull out with an electric
It is Prather 270/6 and Oxtura X470/9

Wa-wa-wa-what is that?!?!?!?!??!
Do you actually use these props?!
I have a 5 blade from Propshop (UK) that I am having trouble with,
I cannot even imagine a use for these 2 props...

[Joern Markset]

Yes I do, the Prather 270/6 is a hell of a good propeller for 35 cc in choppy conditions, and also for a Zenoah running with low timing (high torque) and long pipe. The Octura propeller is quit heavy even for a 35 cc, but when the waves are high it is good. When you launch the boat you reach about 2 meters and then "smack" the propeller is almost stuck in the water.
On our NODD mark V-130 boats we ended up with the propshop 6717/5 as the best propeller.

[Ub Hauled]

amazing... all of the boats you are running those props are monos or do you use any hydros with them?

[Joern Markset]

amazing... all of the boats you are running those props are monos or do you use any hydros with them?

These are only used on monos. On my hydros I`m using Octura 2170 cup7,1 (gas rigger) 90 rigger - 1667 cup 5,6 - 6,0 and H50+S31, 45 rigger - 1457 cup 4,2 - 4,8, 21 rigger 1445 cup 3,4 - 3,6 and H7

[Ub Hauled]

Takk Joern...

[Joern Markset]

Takk Joern...

Hehe, bare hyggelig ;-)

[Punisher 67]

I guess you will find these props pretty hard to pull out with an electric
It is Prather 270/6 and Oxtura X470/9

Jesus murphy....The last time I seen props like that was in a wendy's snow cone machine..........................

[Ub Hauled]

I knew I could count on you stopping by and appreciating these props Peter,
crazy stuff! Ours are nothing compared to these props man!

[H2OCamel]

OMG those props are wild!!! You could use them in the off season as deli meat slicers!Here I thought putting a 4 blade on my HPR was radical!

Peter are you going to pick up the gauntlet and figure out how to turn those bad boys with FE power? (your boats are killer powerhouses)

[Punisher 67]

Those are insane , me and Jan have had limited success with the 5 blade cleavers

Thank you Christopher , those would be a little to much even for the Lehner 3080's . I guess they better come out with a larger motor....................

[bustitup]

Those are insane , me and Jan have had limited success with the 5 blade cleavers

Thank you Christopher , those would be a little to much even for the Lehner 3080's . I guess they better come out with a larger motor....................

what about that big coffee can sized Plett someone posted here

[Gerwin Brommer]

Plettenberg Teras ?

[Ub Hauled]

Those Teras are big no doubt, but I am not sure it can handle a prop that size with great success... then again, I don't own one.