Zonda Cat 41" from Horracing
Collapse
X
-
Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of itYOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @ -
ok hehehe,
what i need to mount my traxxas 2056 servo into this: zondafgartr3.jpg
i only got the servo, no servo mountZonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
Apologies Ray.
The hulls I've assembled RTR came without motors installed..the TP were boxes inside the hull.
However RCB also bring in the assembled jobs.. saw a box of those with motors outback of store... 'assumed' TP.
Well, I've looked at RcBoat Bitz, Kintec and TP power and as I thought before I looked, there is no TP power 2075Kv motor but, there definately is a 2075 Feisuda motor, 2 pole motor. They put it in the stock Genesis and many, many other hulls also.
Neither Kintec or RCBoatBitz say in description that it is a 2100kv TpPower motor, just sdays 4 pole and I'll bet you it is a 2 pole FSD motor in black.
I bet you a blown 2075kv rotor, lol...
I think Kintec & Boatbitz made boo boo.... but, maybe Twisted can give us a real close up of the motors end bell and then we will know 4 sure.
The pictures from HOR show the 2 pole FSD motor because of the silver pan head scews for the endbell. TP power uses set srews. Save picture as, then zoom in....Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of itYOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @Comment
-
so they are tp motors, tppower is the one who teach leo neu and the rest how to build fine motors....
Darn that Steve Neu, now we know the truth - he's a ****** copycat!!
They don't sell these here and from what I have read in some of your post. You would like to sell them. You need to know that I would not have posted this if you would have been nicer to me. I take about selling something and you went off on me. ok I get it so know every time you want to sell something I will show everyone how to buy it cheaper. not fun is it?...if I choose to look and post them you should be flattered.
.ERROR 403 - This is not the page you are looking for
Comment
-
Well, I've looked at RcBoat Bitz, Kintec and TP power and as I thought before I looked, there is no TP power 2075Kv motor but, there definately is a 2075 Feisuda motor, 2 pole motor. They put it in the stock Genesis and many, many other hulls also.
so they are feisuda 2 poles, gonna kick them out of the window and put my leos in there......
about the tppower and neu leo lesson, seems to be true, many people are talking about this.
WTF?? Who is he talking to? That kind of threatening talk will get him banned. Good thing for him Steve's out of town.......
back to my question:
what i need to mount my traxxas 2056 servo into the boat.Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
zondafgartr3.jpg
Place the servo into the area shown ( attached ppic) and hold with zip ties.
Perhaps joining an Austrian forum may help your language difficulty ?Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of itYOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @Comment
-
Gonna try.
An Austrian Forum about Rc boats is like flying pigs....
Thank you all for the answers, if i get the boat i will Upload some pictures And Drive videos.Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
Some of those Austrian boats are the fastest flying pigs you'll ever see......
bye !Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of itYOUTUBE
@ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @Comment
-
Update: I ordered the hull on 7/29, it left Hong Kong 8/10, arrived in the U.S yesterday...so it should be here this coming week."There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
Funny you put people in that kind of light. You sound like a guy that gets his kicks from others that are learning.
Question do help others or just enjoy the learning curve?twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
I sent mine back today by airmail and hope to have another one soon. I hope he sends the 150mm push/pull rudder with it to cover the return shipping. Johnny said he would cover the return shipping. It cost me $57.65 so it should be a wash on the rudder.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
I lookat these motors that come with the boat and the can is done well and the wires comming out of the can are flexable. I would say that they are custom ordered. Some motors are made to what you want as long as you buy a lot of them. Looking at the can I would say they are made by TP Power.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
I lookat these motors that come with the boat and the can is done well and the wires comming out of the can are flexable. I would say that they are custom ordered. Some motors are made to what you want as long as you buy a lot of them. Looking at the can I would say they are made by TP Power.
I'm not saying they are 2 pole 4 sure, I'm just saying it looks that way in the picture and the first guy to sell these was HOR and he never put 4 pole motors in them.
Thats all I know or would like to know, thanks!!Nortavlag Bulc
Comment
-
Comment
Comment