Tweet
ok that is not good, but this must be much power to brake such a hull -.- you ordered the kevlar version? i ordered the normal, i think mine is looking a little bit different from the outside
-
Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100c -
arhg that sux twissted!
Its just not the paint thats cracked?Comment
-
no if you put pressure on top it opens up on both sides. Here are the emails, so far:
I will open the link tomorrow and let y know the solution tomorow
Sent from Johnny's iPhone
horracing.com
fullwintextile.com
speedsupreme.com
On 2012年8月16日, at 13:25, "jack payne" <[email protected]> wrote:
>
> Ok I sent pics. Please replace boat-----
> On Tue, Aug 14, 2012 8:33 PM PDT Cheung Johnny wrote:
>
>>
>> sorry
>>
>> please shoot me photos for our record
>>
>>
>> Date: Tue, 14 Aug 2012 20:31:55 -0700
>> From: [email protected]
>> Subject: Re: Order Update
>> To: [email protected]
>>
>> I got the boat to day. got it home and found 2 large crack in the hull. both sides of the front. About 8 to 10 inches long. box is not crushed so it was shiped this way please replace as soon as possible. need it fast. I can send pictures as soon as I get my camera back.
>> from: HOR Racing <[email protected]>
>> To: Jack Payne <[email protected]>
>> Sent: Wednesday, August 8, 2012 6:33 PM
>> Subject: Order Update
>>
>>
>> HOR Racing
>> ------------------------------------------------------
>> Order Number: 1538
>> Detailed Invoice: http://www.horracing.com/account_his...?order_id=1538
>> Date Ordered: Saturday 04 August, 2012
>>
>> The comments for your order
>> are
>>
>> CP854817094HK
>> shipped on 7th Aug 2012
>>
>>
>>
>> Your order has been updated to thetwissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
They don't sell these here and from what I have read in some of your post. You would like to sell them. You need to know that I would not have posted this if you would have been nicer to me. I take about selling something and you went off on me. ok I get it so know every time you want to sell something I will show everyone how to buy it cheaper. not fun is it?
I like your work that you do on boats and if I choose to look and post them you should be flattered. I know your fallowing along on the post and getting cranky isn't going to do any good for anyone.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
now im scared that mine is cracked to when it comes -.-
tweissted you can take some pictures for me how to install the servo? doesnt know if there is already a servo holder, got the traxxas 2056 servoZonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
From what I can tell you use a zip tie that you loop through the graphite plate and that is all they supply. I don't like it and will be changing it. It wouldn't take much to mount nuts to the plate and use a bracket that wouldn't flex. as they have it side to side they have covered but the torque would cause lifting of the servo from it bed that there.
The arrow is the zip tie hole. zip ties get weak and I wold make custom studs that could hold a bracket across the top. Before I bought the boat I wanted to do a 150mm rudder from Horracing. this would change the servo to standing mount.
twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
servo mount
this is what I want to try.
I'll be using a HV titanium servo.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
ok thats *!***!***!***!**, zip ties dont hold a servo enough, there must be a way to get a servo mount for this, i bet they sell it to but not with the setup -.- i try my best and send you a picture when i get my boatZonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
so you go for pull pull :-) gonna work, you need to drill an aditional hole in it. the top picture is from a other boat ?Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
-
I think I will change the cooling system as well. I will test this system and if it works I'll leave it. I plan on building a bigger cat this winter and so some of my ideas will go into it. I currently have a deep-v hull boat that is around 56" long and would like to build a Catamaran that is a little bigger. Say 60". fightercat has one I like.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
42mm props are fine to start with on these motors. The motors are FSD brand 2 pole motors.Originally Posted by Mecka1990
PLEASE HELP :-(
need every detail about the motors what horracing puttet into this boat, they dont answer on any question i asked them, only got the shipping info and that i can run 2x42mm prop on it, nothing more, and the information that the page got is this:
Motors: water cooled 2075KV 3674 brush-less in-runner with motor mount (2x)
Thats so hard to buy such a nice boat but no informations whats the manufacture of the motors and the other informations, kv and size are really not enough -.-
The limit on one (1) of these motors is about 6S in a 37" Genisis Cat, single drive. A few runs and the cores will come apart.
Now, you have 2 pushing a 41" cat so, there is less stress on the motor in your application. 5S would be fine, 6S and who knows how long the motors will last.
Steve at OSE has some very nice motors that will fit right in there. A pair of 4 pole Leopards like the 3674's he has would be a great upgrade since they can handle much more abuse than the stock motors. A pair of 4074's would be awesome too.
Remember Steve is so very nice to allow you to post your thread that does allot of advertising for HOR.
What is the story with slow delivery lately?? Thats not like Johnny C.
Nortavlag Bulc Comment
-
yeah twisted i will test the water cooling to 1st, 1 line for 2 esc´s and 2 motors, seems not ok, but well, maybe it works with the speed....
ok so i dont need to think about the motors on 5s now, i got one leo 4082 1600kv 2y, from my old boat, tested it one time and my boat sinks (lost flexcable, esc meldet everythign down, smells like someone dies in there -.-) i will buy another one and put them into the boat, seems like there is enough room for them, 5s will stay on them with 5,5mm connectors.
the funny part is, the boat comes from hor, the rest is from ose, so i think steve likes that, hahahaha, everything i buy for my boats or hulls is from ose, best quality and the price is ok.
the delivery, i dont know, i dont like the delivery of hor, and i dont like the communication of hor, if you want to buy something, he answer, if you already payd, he dont answer, or you wait 4 weeks for a answer, thats bad for me, im from austria and my english is badass, but i can write it that someone understand me, isnt so hard, and when i dont understand something, i go for google translater or others, works fine :-)
twissted, a 60" cat, you really got enough room for that in your home? i put everything under my bed or in the celler, i fly to, 1x radian, 1x radian pro, 1x traxxas mustang gt (120 km/h) onroad, 3x deep v plastik hulls that doesnt run any more (crashed in racing) and my old best boat, spartan, but spartan is melted by the seaking 180amp (new version) because i tried to dive with it :-(Zonda 41" Carbon Cat, Motors: 2x 2075KV 3674 Brushless Inrunner, ESC: 2x 200Ish plus, Props: 2x 42mm, 2x 5s 5000Mah 50/100cComment
Comment