Large Hulls?

[Jacked1]

that would be nuts to see actually run
have you tested that setup out yet?

Thanks man! I ran them in my hands and my 47incher has a similar drive but with gears and has never failed me.

[b.mcdaniel.2009]

that would be nuts to see actually run
have you tested that setup out yet?

Great buy Brad. Can't go wrong with red n white tu tone. My next mono will have the same color scheme. Hope to see a build thread.

Yep, will have my very first build thread Larry. Keep an eye out for it because I know I'll have some questions lol...

[LarrysDrifter]

Come on with the questions. I'll be happy to help as much as I can. I'll be watching for the build.

[b.mcdaniel.2009]

Come on with the questions. I'll be happy to help as much as I can. I'll be watching for the build.

Thanks Larry

[6sHyper]

gonna be sweet Brad!! Theres that scarabchris guys fountain in the build section that i always thought was badass!!

[b.mcdaniel.2009]

gonna be sweet Brad!! Theres that scarabchris guys fountain in the build section that i always thought was badass!!

Yes, its a very nice clean build!

[Brushless55]

What about a 47" DF copy?
are they decent in waves and wakes?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130293791666&ssPageName=STRK:MEWAX:IT

[crrcboatz]

Again, not a true offshore boat with higher freeboard, deeper vee and stringer configuration found in a true offshore rc boat. GREAT heat racing hull though. I have a friend in Dallas metro that raced one for a full season and he did very well with it.

[Brushless55]

Again, not a true offshore boat with higher freeboard, deeper vee and stringer configuration found in a true offshore rc boat. GREAT heat racing hull though. I have a friend in Dallas metro that raced one for a full season and he did very well with it.

Oh I hear you that it's not a true offshore hull
but it's kinda big and running a Castle 2028 or Leopard 5692 on 10s2p could be nuts!

[FighterCat57]

Going to start a new thread on the power plant suggestions later this evening. Thinking twins....

Let me know... I've got some ideas. I'm working on a 57" twin cat myself.

[b.mcdaniel.2009]

Let me know... I've got some ideas. I'm working on a 57" twin cat myself.

Guys I decided to go with a single 2028 in the 56" Fountain hull(starting a build thread tonight!). I have a 50" Apache and a 45" Insane mono on the way also. I would like to run twin's in either of those 2 hulls. I orginaly thought about the 48" DF copy hull from Promise Hobby(e-bay) for twins but after talking to some of the gasser guys, the larger gas hulls were meant for actuall Off-Shore water.

[Brushless55]

Guys I decided to go with a single 2028 in the 56" Fountain hull(starting a build thread tonight!). I have a 50" Apache and a 45" Insane mono on the way also. I would like to run twin's in either of those 2 hulls. I orginaly thought about the 48" DF copy hull from Promise Hobby(e-bay) for twins but after talking to some of the gasser guys, the larger gas hulls were meant for actuall Off-Shore water.

Are you thinking twin CC1717 in the 50" Apache?
I have two of those motors that could makes it way into mine if I get around to ordering that hull

[b.mcdaniel.2009]

Are you thinking twin CC1717 in the 50" Apache?
I have two of those motors that could makes it way into mine if I get around to ordering that hull

Ya Todd, twin 1717's with 2 T-180's...or twin 5692's....Kinda a budget build. I'd think should be around the low to mid 50's with that Apache.