Large Hulls?

[b.mcdaniel.2009]

Yea I do! haha When I flip my Fun Cruiser and Bonzi in the same day it is kinda ridiculous. My parents have a house there and on the weekends in the summer with tons of boats and wind it gets to look like a scale version of Deadliest Catch!

Yep, We have the same problem.

[Make-a-Wake]

Here are some real jumpers......must be getting 80-100 feet on the larger jumps.

Never knew they actually made the boat that comes in at 0:09......thought it was just an RC
..

[b.mcdaniel.2009]

TFl just contacted me back and said they do NOT sell just the hull. WTF. I dont want a gas engine

[Jacked1]

This might work? Thought i would let you know since it is pretty inexpensive.

[b.mcdaniel.2009]

This might work? Thought i would let you know since it is pretty inexpensive.

I just e-mailed him to see if there was a hatch.

[Grazacind]

This is what we have to offer locally in Brisbane.

http://www.viperhulls.com/

Look like a heavy chop wizard I think.

Cheers

[Jacked1]

I just e-mailed him to see if there was a hatch.

Sweet! I was wondering the same thing. I might build one this to run beside the big boat.

[forescott]

This is the boat for you.......Bonzisports 84 classic. At 7-feet long you might have to tow it behind your car!

http://bonzisports.com/images/galleries/84/index.html

[crrcboatz]

This might work? Thought i would let you know since it is pretty inexpensive.

I will tell you that the hull on the link above is not a good choice in my opinion because it is only 12" wide. A long narrow boat like that will not handle rough water well. The same length apache is almost 15" wide and does much better for offshore type use. That hull is a sport only not for rough water.

[b.mcdaniel.2009]

Sweet! I was wondering the same thing. I might build one this to run beside the big boat.

No hatch! Poop!

[b.mcdaniel.2009]

I will tell you that the hull on the link above is not a good choice in my opinion because it is only 12" wide. A long narrow boat like that will not handle rough water well. The same length apache is almost 15" wide and does much better for offshore type use. That hull is a sport only not for rough water.

[b.mcdaniel.2009]

This is the boat for you.......Bonzisports 84 classic. At 7-feet long you might have to tow it behind your car!

http://bonzisports.com/images/galleries/84/index.html

Ya I seen that Scott, but I'm not trying to take out a second morgage to power it But good thing I have a truck to hual a large boat though.......

[b.mcdaniel.2009]

This is what we have to offer locally in Brisbane.

http://www.viperhulls.com/

Look like a heavy chop wizard I think.

Cheers

HMMM thats a clean, sleak looking hull, but shipping would cost as much as the hull lol....

[crrcboatz]

This is a new arrow shark hull I have. It is 50"x 14.75", low freeboard, great bottom for speed and very wide as you can see from the back. This hull is STRONG. Earlier arrow shark stuff was flimsy and weak but they got this on right. Very light too as big boats go. Love the lines!!

It is getting a jg 28.5cc topend zenoah for power but would be a very nice hv electric project hull.

I contacted arrow shark and told them I wanted the boat but shipping cost of $75 was a stumbling block. They only charged me $25 for shipping and I got the boat for $325 shipped. Here is a link to the boat.

http://cgi.ebay.com/Arrow-Shark-50-Negotiator-Hull-2010-Painted-Version-/350298356209?pt=Radio_Control_Parts_Accessories&hash=item518f68b9f1

The windshield work is great. Everyone of those screws on it, there must be 25 or so, are real and go through to the back.

Curt

[Jacked1]

Yea I was thinking that one was pretty narrow too but possibly 125 shipped is pretty nuts! I would love to make a 84" once I get out of college. I saw one in person a while back and I bet it could have doubled as a kayak!