What Feigao 580l motor for a 37.5" Mono

[Xfactor]

The zr's are a little cheaper I think. I dont know much about the nue\castles but the 1527 is good to go. Here let me give you something someone gave me
http://www.castlecreations.com/suppo..._boat_apps.pdf this came to me via detox

[agressive1]

Thats useful will have to have a good look at that.

[agressive1]

By me looking at that chart i believe that my boat is heavy seen as though its a 37.5" mono hull with 2x 6s 5000mah batterys on board which makes it fairly heavy, do you agree?

For a heavy setup it says to use a 1521 1.5d although at only 4s, im running 6s?

I think a 1527 1y is the go here as i can run it on 6s and its a competition motor.

Can someone tell me what the 1.5y means and the 2y etc etc?

[Make-a-Wake]

I just got my 1527 1y in and its a large motor............running in a 45" mono on 6s.............ran it hard yesterday, came in at 82* on the can and 96* on the rear bearing,.................quite happy with that, much better motor than a 580L. Its over 100mm long and 40mm dia..........pic for comparison

[Xfactor]

I think thats the turns of the wire.Did you film it so we can see?I told you that a 580 and a 1527 was a bad comparison. What turn is that kb?

[Brushless55]

now what about the Castle/Neu 1717?
anyone ran one yet?

[Xfactor]

Whats the dimensions of a 1717

[Brushless55]

Whats the dimensions of a 1717

With fins about 50mm x 85mm
and 20 oz

[Xfactor]

Hes healthy huh? Whats the kv?

[Brushless55]

Hes healthy huh? Whats the kv?

I believe 1580kv

[agressive1]

Does anyone know when OSE will have the next shipment of Neu motors?

[agressive1]

bump

[Make-a-Wake]

e-mail Steven..............

[agressive1]

Just did then.

By the sounds of it they are a fairly hard motor to get your hands on specially if your in Australia like me.

[Make-a-Wake]

Oh............i thought your VI location was Virginia.........LOL