Blandon's P-Limited tunnel build

[Blandon]

I have a Grimracer 42x55 2 blade in there now. I will see what that does first and go from there. I also have an Octura 445 2 blade that I think will be a good prop for this hull.

[Beaux]

I saw that, looked like something extra. I'm running a K&B leg w/leo 3650 mm 2930 kv haven't been able to open it yet.

[Blandon]

2930 KV is a lot of motor. That thing will haul ass!!! What are you running for an esc and battery?

[Beaux]

A hobbyking 90 Amp 5s 18.5 volt. She wants to fly after about 50ish.

[Beaux]

I should probably turn the voltage down, I don't think the esc will hold once i get it to where i can stand on longer. AS long as i stay with a 40 mm prop it does'n get even warm.

[Blandon]

I forgot to ask, what hull are you running?

[Beaux]

a f1 hornet from hk, and i've got acouple generic chinese. I put a couple layers of resin on the bottom of the sponsons to sharpen up the edges, I guess blue printing it really helped in the turns.

[Beaux]

How long is your boat, i'm looking ata31.5 inch fiber glass for about a hundred bucks the same place i got the 24 inch chinas very well built and solid.I may have to step up for this motor.

[Blandon]

How long is your boat, i'm looking ata31.5 inch fiber glass for about a hundred bucks the same place i got the 24 inch chinas very well built and solid.I may have to step up for this motor.

The VS-1 hull is 28" long

[Doug Smock]

Looking good so far Blandon.

[Beaux]

thanks.

[Blandon]

Looking good so far Blandon.

Thank you sir!!!

[iridebikes247]

Nice this looks great so far, took guts sawing into the hull lol

[Blandon]

Nice this looks great so far, took guts sawing into the hull lol

Thanks, yeah I basically opened the box, took the hull out and started sawing!!Lol

[Beaux]

Blandon, are you planning on painting or leaving the hull natural?