HPR 135 Bulletproof Build

[nata2run]

Well done Chris looks great.!! I would use black screws instead of the chrome ones :) makes the purple washers stand out more. But that's just me hehe

[ManuelW]

The seam on the battery trays look awesome. But for gods sake, please remove the stock badge on both trays. In the meantime it should be clear that those are HPR 135 12S trays

regards,
Manuel

[Livewire121]

So Chris how did she do on her maiden?

[Chrisg81983]

thanks guy for the kind words. well heres the video of maiden she ran great for the first time out. i couldnt be happier thanks to all that participated in this build oh and video sux it was taken with a phone by my dad i constantly drag him or my girl with me to shoot footage oh and ofcourse my little one comes AND CANT WAIT TIL THE DAY SHE CAN RECORD PROPERLY SHE IS ONLY 4 AT THE MOMENT

http://youtu.be/IUSLyONGJas

[Jason4636]

looks like it running great for a first run.

[Chrisg81983]

Thanks Jason she ran great that was my lucky guesstimates for cg and trim settings. How's your mono coming ?

[Jason4636]

Its still at the paint shop. Should have it back in 2-3 weeks. I just hope my mono runs as well as your cat.

What speed do you think you was running

[Chrisg81983]

Speeds were decent today maybe high 70's low 80's I am not sure as I didn't GPS and being such a large object she looks much faster probably than what it's really going. I wasn't pushing it hard today basically just playing to test all out. I will run the hell out of her tomorrow after work.

[Jason4636]

Normally I'm just the opposite of you. The larger the object is the slower it looks, at the same speed. I was going to say about the same speeds by looking at your video

[Chrisg81983]

Lol well I could of told u I was backwards. Tomorrow I will run with larger props on 10 s and then soon try 12s with 57's cut to 52

[Jason4636]

That thing should haul the mail. I think I'm going to try a set of props, not to sure how well they will work with my motors. But a set x470 cut down to 60mm.

[Chrisg81983]

70' s cut to 60 is one bad a$$ prop if it can be turned. Did u ever think of a straight 57 ? Those are what I will use for saw passes on 12s for hopefully 115 +

[Jason4636]

I have 3 sets coming from the PS 6015/3, 6017/3, 6516/3.

[Chrisg81983]

Nice I have 4714/3's I want to try I am giving to chris ( dasboata ) to d for me. He is also making my 57's & 57's cut t 52

[Jason4636]

70' s cut to 60 is one bad a$$ prop if it can be turned. Did u ever think of a straight 57 ? Those are what I will use for saw passes on 12s for hopefully 115 +

Straight 57? What prop is that?

With talking to Keith Bradley, when he had the same motors that I'm running in his mystic. He said he had ran up to a 72mm prop. But he also said the was amp hogs. The PS suggested for me to start out with the 6015/3's and I'm going to try and stay under 4" total pitch. I just wanna find the happy medium on my props. Something that make the boat run fast, but at the same time. Try for the longest run time I can. I have 8 5s dinogy batterys coming for 10s2p total of 9000mha. So if I don't run to big of a prop, I should get some decent run times

I think I need to just keep buying batteries, where I can run more. But *!***!***!***!** they are $$$$ if you buy the good batteries!!! Between my 12-4s and 8-5s batteries. I have close to $2k in batteries.