Hpr 06 / 115 build

[Anders.g]

Well for start I bought a new apartment, and this needed full renovation, and by full I'm mean FULL.
And the summer her I Norway was pretty bad, I'm not kidding if I say the we had 80% of days with rain
So I haven't done any thing to her since I painted her, haven't had the time to do the vinyl or any thing, just boring work.
So yes u can say that I feel of the earth, but fond a tunnel with som light and he I am lol

[Chrisg81983]

Ok well I am glad you are ok. So email me some pics of paint work. I am very curious to see it as that was one of ny favorite builds/hull.

[Anders.g]

Ok well I am glad you are ok. So email me some pics of paint work. I am very curious to see it as that was one of ny favorite builds/hull.

Of course I can send you som pictures of it, but now in a storage, waiting for the summer.

[Chrisg81983]

Hey guys been out for some time now but a little update here. I got some new props done a few weeks ago by chris ( dasboata ). They are 447's cut to 44 and came out totally awesome.

[srislash]

Gonna scream these up are we?

[Chrisg81983]

You know it shawn ! I am gonna run them on 8s in wye and 5s in delta I hope. Then I also might try my 2240/7's on 6s in delta. I am driving to the lake now to see if its frozen or not. If its not then hopefully I will get some run time in today.

[Chrisg81983]

Ok so I picked up a new set of the yge 160 hv's

[Chrisg81983]

Oh and I also installed my new set of lehners. So it should be very interesting to see how she runs.

[nata2run]

She is gonna be sick bro, get that thing in the water Frozen or not!!! It's always warm in Australia

[twissted]

Nice boat. Great speeds as well. Awsome!
I wonder if I could get my zonda to this level? It would take some work I think. I my put some time into it soon. Any how, you have a great boat.

[ManuelW]

Hi Chris,

looks good so far, two things might be worth to mention:

a) can you shorten wire length between ESC and motor, so directly connect the ESC to connectors at the motor and get rid of the extra set of red Y-harnesses? Should give it a neater look and may also be fine for removing some stress on components

b) totally forgot about that, I'd recommend to add some extra caps like YGE CAP9 to the ESC's. I also had these extra on my ESC's and I may recommend to do so also on yours?

regards,
Manuel

[srislash]

with Manuel. All leads as short as you can.I found it took a bit to get the balance of CG correct then tune down the wires. This will help things live in the long run.

And WHAT DO YOU MEAN, New Lehners?

[Chrisg81983]

Ok changed up my layout I was trying to avoid trimming the esc wires. My plan is only to run them once so came up with this with the help from others thanks guys.

[Chrisg81983]

@ Shawn when I first ordered my hull I also ordered a set of 2240/7's they are 2114 kv in delta and around 1250 kv in wye. So I will run on 6s in delta and 9/10 s in wye. My last motors were awesome but I sold them last week. I am still deciding if that was another one of my stupid ideas. They were 2950kv in delta and around 1730kv in wye. I ran them in wye on 7s never got to try 8.

[srislash]

Ahh, Good job on the splices,I may have to steal that for my big Proteus motor.