Skippies and Kiwis

[drwayne]

next subject.
Ive 2 riggers arriving soon.
Ply with keyed bulkheads..a work of art
Worthy of wood stain and clear.
3" and 4" tub width.. 38" long .. 1,080gms inc hardware
Have a few 1521/1y/s .3/16 flex.. . own esc..
Same design before it went oops.. 135k+ on 1655+6S .. cresting 155k on V955/3 ( boiled pack@2min)

what 3/16 prop dya reckon ?



W

[Flying Scotsman]

Do not believe everything you read or hear.....it was my tug....Big Bertha.

I have to use more vaseline.

Douggie

[andym]

Wayne what speeds do you need to win a race ?? What prop handles the best so far, did the V series have to much lift and cause any hop? I would work on the 1655 how about a ABC 2218

[drwayne]

Wayne what speeds do you need to win a race ?? What prop handles the best so far, did the V series have to much lift and cause any hop? I would work on the 1655 how about a ABC 2218

V955 cavitated on launch to @50% when it caught and raced off.
Handling was great.... setup with hub 5mm above rear spons... rig floated on air.

When replacement rig is finished ( test rig RIP ).. will log several runs on large oval course (100km away) ... local test pond long and narrow.

6S oval rigger is @125K+ on oval

ahhh
V955 100M(100yd) sprints, 6or7 in 2 mins and smoke escaped
EagleTree wouldnt sync to the usb ..... so unable to give stats.
Since made load shunt that feeds back to Tmp port for 0-300A readings in 1A increment.
Ducks are fair game, but eagles ?

[ozzie-crawl]

do what douggie does,no need for data logger,have a small toggle switch inside
connected to a red led light on exterior of hull,place frog in boat.
if the frog senses a problem he hits the switch causing the red light to come on
warning of a problem.
you just need to find a frog that has a degree in electrical engineering and likes high speed boat rides
douggie had one,but his sexual needs were greater than his boating needs one day.

[drwayne]

Ozzie, Ive got the trailer, forget the film name, but that's a pic from ' Toad popper's run '....

Ive FPV ( onboard cam to remote screen/dvr ) setup that alleviates the need to endanger Douggie's playmates.
I tried an onboard frog engineer once .. kept hogging the camera.

[egneg]

next subject.
Ive 2 riggers arriving soon.
Ply with keyed bulkheads..a work of art
Worthy of wood stain and clear.
3" and 4" tub width.. 38" long .. 1,080gms inc hardware
Have a few 1521/1y/s .3/16 flex.. . own esc..
Same design before it went oops.. 135k+ on 1655+6S .. cresting 155k on V955/3 ( boiled pack@2min)

what 3/16 prop dya reckon ?



W

Try a 1752/3 or 1755. Watch the temps!

[andym]

Well I have had it, sent Paddy his latest 1/2 dozen props and a run of more go than show prop company decals and the silly old WANKER threw them in the bin!!! They are not CHEAP. Paddy the price's I charge you ( heavily discounted with silly old fart discount) have just gone up!!! Perhaps you should join the POETRY thread with the other poofters. WTF were you thinking mate ???????/

[drwayne]

Well I have had it, sent Paddy his latest 1/2 dozen props and a run of more go than show prop company decals and the silly old WANKER threw them in the bin!!! They are not CHEAP. Paddy the price's I charge you ( heavily discounted with silly old fart discount) have just gone up!!! Perhaps you should join the POETRY thread with the other poofters. WTF were you thinking mate ???????/

Errrrr....... Paddy threw props or decals in the bin ?
If the decals survived.. pretty please send my props back home . . untouched !!

:worried:

Wayne

[drwayne]

Did anyone else in Australia hear the dreadful news.. a flock of Crows crapped all over Brisbane ..... ??

[andym]

Oh yeah baby, GO THE CROWS. It was the decals Dr W ( W could mean Wayne or Wanker both good Aussie names )

pretty please send my props back home . . untouched !!

Do you want me to post your props back untouched ???
The 1/2 dozen props were not yours Wayne they were his ! Paddy does NOT do props as he finds it hard to get great gobs of epoxy to stick to them

[drwayne]

Oh yeah baby, GO THE CROWS. It was the decals Dr W ( W could mean Wayne or Wanker both good Aussie names )

Do you want me to post your props back untouched ???
The 1/2 dozen props were not yours Wayne they were his ! Paddy does NOT do props as he finds it hard to get great gobs of epoxy to stick to them

If Paddy had disposed of props, not decals.. I wouldve held concerns for the chastity of my naive props.. innocently they ventured into the outback.. .


as expected Adelaide's criminal element were quiet today, either playing football or watching 'live' on their stolen big screens ....

[andym]

I will happily send them back untouched, cost is the same though. Oh dear looks like I am one of the criminals you talk of.

[andym]

Oh and I listened to the great game on my stolen radio

[Flying Scotsman]

Andy, time to go to bed and read some poetry

Douggie