This weekend, the club is meeting and I'll GPS it then. I also did a little hull mod, I'll let you know how it goes. If it works I'll post pics and all!
Monica thats even more funny Should I find a cave to hide myself that had me rolling aroung the floor with laughter, tears running down my face!
your English is fine,we all know what you mean, no need for a teacher.
looking back, what English slang do you mean with Ron?
Ron.
I'm glad that you & flapraptor like the Y547 as much as I do. It's got just the right amount of lift with a 2200kv motor to get the tail up with the COG back that far. I also run just a smidge of negative in the strut.
As Ray suggested, I'd also like to see the profile of the de-tonguing that Daz worked into the prop too. Unless it's a national security thing. Mine is what I'd call 2/3 de-tongued. Not fully de-tongued.
No real negatives but it will load up the motor a bit more. Therefore a slightly higher current draw & possibly increased temps. It may also have slightly more lift which may be a good thing. Just means you might not need any negative angle on the strut.
I never tried it as a stock prop so I can't really say.
But I have seen boats run bigger & higher pitched props, than what was thought to be the optimum, resulting in faster boats, with less heat on the electrics, & more capacity left in the pack after the race, because the boat just "FLIES" better.
Just give it a try, & monitor the temps & battery usage.
No real negatives but it will load up the motor a bit more. Therefore a slightly higher current draw & possibly increased temps. It may also have slightly more lift which may be a good thing. Just means you might not need any negative angle on the strut.
I never tried it as a stock prop so I can't really say. But I have seen boats run bigger & higher pitched props, than what was thought to be the optimum, resulting in faster boats, with less heat on the electrics, & more capacity left in the pack after the race, because the boat just "FLIES" better.
Just give it a try, & monitor the temps & battery usage.
And these results were with de-tongued props ?
thanks
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment