NEW SV27 / Preped or parted

[ice329]

I have a Bran New Aquacraft SV27. I got it a little cheaper then the going price of 249 because the wood is a little out of place. I am looking to sell it (after I compleatly prep it, test run and adjust it. The wood will all be Zpoxied, the hardware all siliconed and the shaft alighned, I will also install a waterproof antena and mount it on the rear of the boat. Everything is included just as a new boat. the price preped is $200 plus $12 shipping. or $180 as is plus $12 shipping

OR

I can bust it up and sell it seperatly.. its all bran new so if your looking for something PM me and if I feel its a fair deal for me to break up the boat I will. Radio, speed control, motor, hardware, hull... let me know

[CedarTree]

If you end up parting it out I need the stinger/strut assembly and prop.

[old guy]

Hi that looks just like mine lol I got mine off you I'm interested in the motor and ESC if price is right one old guy to another
Old Guy

[ice329]

I do hate to bust up a perfectly new boat but if one or two more things are wanted by members I will. As soon as I feel there is enough wanted I will shout out the prices and they will be fair, there all bran new but I will test anything first if you ask.

still available, radio+reciever, radio box/w servo, the running hardware, turn fin and trimtabs, stickers, and the hull and cowl.

[badag98]

I would take the turn fin and stickers
Let me know if you part it out

[johnnyoverkill]

If you part it Joey, PM me on the ESC.

Thanks,
John

[old guy]

If you part it Joey, PM me on the ESC.

Thanks,
John

Take a number Johnyoverkill

[ice329]

John, Old guy asked for the esc already.

The SV27 looks like its discontinued... for someone who wants one, I can prep and test this one... its bran new.

I will pull the boat apart on saturday.. either way preped or parted it needs to come apart, so if someone wants it preped and ready to go think about it before saturday.

[BakedMopar]

Interested in the rudder blade.

[dgfarb]

how much for the hull/ cowl?

[ice329]

OK guys.. Looks like there is more then enough intrest for the parts so sometime between now and tomarrow (saturday) I will break down the boat and price the things you all want and we figure the cheapest shipping, in most cases regular us mail will be fine, the motor and esc to Canada we will need to check. The person DGFARB looking for the hull and cowl, your shipping will prob be around 12-13 bucks, no way around that so the hull and cowl will be price good, and remember the wood need to be repaired, not a big deal at all.

[dgfarb]

ok, thanks

David

[old guy]

Good to here Joey shipping the motor and ESC should not be to bad just had a tuned pipe sent up here for my Jae 12 in a box that is 3"x 31/2"x 9" from MN it was $2.27 the prop you just sent up here was under $2 So it should come in under $5.00 but let me know and no rush to get it out just send it next time your in town.
Old Guy
PS still have 2 ft of ice hope to get the SV 27 I got of you wet soon

[ice329]

OK guys... I know this post has gone back and fourth but someone wants to buy the red boat. BUT... Here are almost all the parts and hull and cowl from a new blue SV boat. Old Guy I am sorry but there is no ESC but there is a motor.

I will list the stuff for the guys who asked on the post or PM'ed me, Also will combine shipping if possable

Turn Fin and a sticker sheet either the one from the red or the one from the blue boat. $12 plus $3 shipping. (Sold)

Strut w/mount and screws $14 $2 shipping (Cedertree) (Sold)

Entire rudder assembly with stearing arm $30 $3 shipping (Sold)

Hull and Cowl, will include trim tabs and motor mount and stearing linkage. Hull is bran new and almost perfect, there is a tiny hairline crack in the paint in front of the water exit fitting. $45 $12 shipping (dgfarb) (Sold)

http://i110.photobucket.com/albums/n103/ice0329/IMG_3259.jpg

http://i110.photobucket.com/albums/n103/ice0329/IMG_3260.jpg

Drive cable, motor coupler, and drive dog $15 $3 shipping (Sold)

Motor, which include the mount, the coupler and cooling jacket, $35 $4 shipping, if you need the original bullets I need to solder one on better, if your changing them let me know and it saves me the work. (Old Guy) (Sold) http://s110.photobucket.com/albums/n...t=MVI_3253.flv

Radio and reciver channel (64) $25 $5 shipping

Waterproof box with servo $20 $3 shipping

Cooling Plates and cooling jacket $10 $2 shipping

[badag98]

I'll take the turn fin stickers and rudder assembly. Send me your paypal info and i will get you payment.

Payment sent!!

Thanks