Your MG that started off as a hull

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • srislash
    Not there yet
    • Mar 2011
    • 7673

    #1381
    Man there is alot of retailers in FLA.Rocket City has AC as well.
    Hey Mac when are you going to put that front page setup in something http://www.gizmomotors.com/

    Comment

    • macdon
      Senior Member
      • Jun 2011
      • 970

      #1382
      Originally posted by srislash
      Man there is alot of retailers in FLA.Rocket City has AC as well.
      Hey Mac when are you going to put that front page setup in something http://www.gizmomotors.com/
      Yeah, I was told that there are lots of rc boating retailers in Florida - many water holes I guess.
      Brian Watts of Rocket City seems like a good guy, unfortunately he doesnt seem to carry AC boats anymore.
      Next boating day for us would be on May 6 - the guys have been teasing me to finish this up by then hahahaha!

      Comment

      • opluna
        Junior Member
        • Dec 2011
        • 6

        #1383
        Originally posted by macdon
        Yeah, I was told that there are lots of rc boating retailers in Florida - many water holes I guess.
        Brian Watts of Rocket City seems like a good guy, unfortunately he doesnt seem to carry AC boats anymore.
        Next boating day for us would be on May 6 - the guys have been teasing me to finish this up by then hahahaha!
        Brian use to sell acboats, we got about 6 lasers from him that was in Feb. 2002.
        He was the only seller of acboats then for the whole of USA.
        At that time you have to buy the hardware that goes with boat

        Comment

        • macdon
          Senior Member
          • Jun 2011
          • 970

          #1384
          Originally posted by opluna
          Brian use to sell acboats, we got about 6 lasers from him that was in Feb. 2002.
          He was the only seller of acboats then for the whole of USA.
          At that time you have to buy the hardware that goes with boat
          Hey Master O! Nice to see you finally posting here! :)

          Yeah, I actually asked Brian first even before I talked to Andy. He now favors MMP products.
          I totally enjoy my Lazer 45 and now im building the R-42. Andy of AC really makes top notch products!

          Comment

          • tagasagwan
            Molino Boater!!!
            • Jun 2008
            • 990

            #1385
            Originally posted by opluna
            Brian use to sell acboats, we got about 6 lasers from him that was in Feb. 2002.
            He was the only seller of acboats then for the whole of USA.
            At that time you have to buy the hardware that goes with boat
            He he hey! Finally! The master came out! Nice to see you posting here! I hope that others will follow. I know they visit this thread everyday just reading! hehehe!
            My Aquacraft SV27's old Video: http://www.youtube.com/watch?v=VoTm4Btz41Q
            MHZ Micro Iceberg, Skunksworks Gen2 Cat twin, Aquacraft SV27, SM29 1515 sold.

            Comment

            • opluna
              Junior Member
              • Dec 2011
              • 6

              #1386
              I just wanted you guys to know that acboats has gone a long way. I am still using the old laser and still competitive next
              to my microburst 51 with a KE30 engine

              Mardon CHIEF, will visit me in awhile to check on his new R42, the proper way of installing the servos

              Comment

              • jasoncyclone
                Senior Member
                • Jun 2011
                • 475

                #1387
                Hey Mardon, nice gasser yOu got there!!!! It's hard to beat AC boats. Stephan, I got all the gasser stuff all wrapped up and installed inside your topgun tonight. Now I just need to get the boat packed up!!!
                Miss Geico CC1515 2200kv T180 2S2S- Twin Genesis with 2 2700kv 2 T180's 4S2P- Stiletto with 2030kv T120 4S1P-DF33 4082 1600kv T180 6S2P- and lots of gassers!

                Comment

                • srislash
                  Not there yet
                  • Mar 2011
                  • 7673

                  #1388
                  Originally posted by opluna
                  I just wanted you guys to know that acboats has gone a long way. I am still using the old laser and still competitive next
                  to my microburst 51 with a KE30 engine

                  Mardon CHIEF, will visit me in awhile to check on his new R42, the proper way of installing the servos
                  I can't wait to get to run with Andy,and see how my FE does.

                  Comment

                  • tagasagwan
                    Molino Boater!!!
                    • Jun 2008
                    • 990

                    #1389
                    Originally posted by opluna
                    I just wanted you guys to know that acboats has gone a long way. I am still using the old laser and still competitive next
                    to my microburst 51 with a KE30 engine

                    Mardon CHIEF, will visit me in awhile to check on his new R42, the proper way of installing the servos
                    I agree with you 100%! I love my laser too! It's always a blast running it! I can't wait for our next boating session so I can run her again. I'll clean her tom. hehehe!

                    You'll do Mac's R-42? Wow! Another boat that will be touched by the Master's Magic! hehehe!
                    My Aquacraft SV27's old Video: http://www.youtube.com/watch?v=VoTm4Btz41Q
                    MHZ Micro Iceberg, Skunksworks Gen2 Cat twin, Aquacraft SV27, SM29 1515 sold.

                    Comment

                    • tagasagwan
                      Molino Boater!!!
                      • Jun 2008
                      • 990

                      #1390
                      Originally posted by jasoncyclone
                      Hey Mardon, nice gasser yOu got there!!!! It's hard to beat AC boats. Stephan, I got all the gasser stuff all wrapped up and installed inside your topgun tonight. Now I just need to get the boat packed up!!!
                      Sounds great Jason! I also packed the ekos and parts then I'll give them to Mardon for final packing. He'll be the one to ship it out with his other boats.
                      My Aquacraft SV27's old Video: http://www.youtube.com/watch?v=VoTm4Btz41Q
                      MHZ Micro Iceberg, Skunksworks Gen2 Cat twin, Aquacraft SV27, SM29 1515 sold.

                      Comment

                      • srislash
                        Not there yet
                        • Mar 2011
                        • 7673

                        #1391
                        You guys are forcing me to look at gasser's you know.

                        Comment

                        • jasoncyclone
                          Senior Member
                          • Jun 2011
                          • 475

                          #1392
                          Hey Mardon, how many boats are coming my way? Can you get me a tracking number and carrier info?
                          Miss Geico CC1515 2200kv T180 2S2S- Twin Genesis with 2 2700kv 2 T180's 4S2P- Stiletto with 2030kv T120 4S1P-DF33 4082 1600kv T180 6S2P- and lots of gassers!

                          Comment

                          • jasoncyclone
                            Senior Member
                            • Jun 2011
                            • 475

                            #1393
                            Originally posted by srislash
                            You guys are forcing me to look at gasser's you know.
                            Hey Shawn, when you get a gasser, let me know! I still have some odds and ends for gassers! Im still trying to figure out what boat to put my spare qd35cc in!
                            Miss Geico CC1515 2200kv T180 2S2S- Twin Genesis with 2 2700kv 2 T180's 4S2P- Stiletto with 2030kv T120 4S1P-DF33 4082 1600kv T180 6S2P- and lots of gassers!

                            Comment

                            • tagasagwan
                              Molino Boater!!!
                              • Jun 2008
                              • 990

                              #1394
                              Originally posted by srislash
                              You guys are forcing me to look at gasser's you know.
                              Well, why don't you? Andy is just a stone trow away from you! hehehe!
                              My Aquacraft SV27's old Video: http://www.youtube.com/watch?v=VoTm4Btz41Q
                              MHZ Micro Iceberg, Skunksworks Gen2 Cat twin, Aquacraft SV27, SM29 1515 sold.

                              Comment

                              • macdon
                                Senior Member
                                • Jun 2011
                                • 970

                                #1395
                                Originally posted by jasoncyclone
                                Hey Mardon, how many boats are coming my way? Can you get me a tracking number and carrier info?
                                As of last count, I think 30 boats! hahahaha - just kidding! Somewhere between 4-6 probably. No worries, if Stephen's boat is ready to go - I can ship his boat first.
                                We'll be sending it thru the post office and I'll send you a tracking once it ships!

                                Comment

                                Working...