Your MG that started off as a hull

[tagasagwan]

Hey Lenny! Sandy is pounding NJ. You take care bud! Be safe okay!

[tagasagwan]

Hard not to click !
Yes I know, And this to.http://www.greathobbies.com/producti...rod_id=PRB2685

OOOH! That's a nice one Lenny!

[macdon]

You guys still remember that cardboard yacht cabin mock-up I did for my funboat? Im thinking of adopting it to the apache hull instead if ever.


We're page 100!!!!!!!!!!!!

[lenny]

Hey Mac and Tag,
It's just a little to choppy hear today to run boats.
But I was thinking about it.
Could have been some good videos on what not to do in a storm.

[tagasagwan]

stay indoors bud! You can go boating another day! Be safe!

Hey! I didn't realized I posted first on page 100 until I refreshed the screen! Hooray! lols!

[srislash]

Atta boy!!!!!!!!!!!!

Damn,look at that,I was one off.Take care there Lenny. Got any sail boats?

[macdon]

Master Oscar has a 55" Shockwave - however it was stored wrong by the original owner using a small boat stand. I think the hull arched or something as master said it runs bad. I had the 55" SW canopy stayed with me a few months - nice drivers! You just gotta watch out for the plastic housing that holds the wing/spoiler. Well, the whole canopy is plastic - it gets brittle in time.

[tagasagwan]

Guys! Where do you think I can get those FlierModel boat esc's and program card? They don't seem to sell them on their website! Do you know a online store that sells them?

Also, Those Flycolor marine esc's looks promising too! HK only sells the lower amps. They only have the 30A & 50A versions. The 150A and above versions should be nice!

I will be needing 2 esc's for my skunkworks, 2 smaller esc's for my twin MHZ Micro Iceberg and 2 more for my future Komodo!

[srislash]

Guys! Where do you think I can get those FlierModel boat esc's and program card? They don't seem to sell them on their website! Do you know a online store that sells them?

Also, Those Flycolor marine esc's looks promising too! HK only sells the lower amps. They only have the 30A & 50A versions. The 150A and above versions should be nice!

I will be needing 2 esc's for my skunkworks, 2 smaller esc's for my twin MHZ Micro Iceberg and 2 more for my future Komodo!

You can go to Alibaba or you can talk to them directly for the Fliermodel.A couple of the FighterCat diehards have done it.A couple of them may even have a spare.But you don't need much for that Skunkworks twin.Seaking 120's for 4-5s or the 80 HV's for 5-10s.I got mine from HobbyPartz for $65 a piece.

[tagasagwan]

I have twin T600 1400kv motors that I can use maybe for the Komodo. What esc should I use on 6S? You're right! For the skunk 2x 120A esc's will do for 4S.

[srislash]

Mmm,I just got a pair of Swordy 200's off Scott and that is what I'll use if the T-600 make it into the Komodo.I was running the ones in the Shocker on 6s no problem.Maybe a pair of those Birdy ESC's from HK that are good to 7s.I think there are some 150's there.

Take a look at some of these http://www.hobbyking.com/hobbyking/s...-Boat_ESC.html

Didn't I see that Jerry had some of these Birdie's JERRY?

[macdon]

I have twin T600 1400kv motors that I can use maybe for the Komodo. What esc should I use on 6S? You're right! For the skunk 2x 120A esc's will do for 4S.

Hey Mr. Electric - TonyS is planning on selling his FE Lazer 45 but without motor. Howz about sticking your T600 duo in that for a twin mono?

[srislash]

There you go Tag.You can blow by those gas guys like I do.HAHA

Somebody do a twin mono before I am forced to.
BTW I just picked up today's shipment from Sirius. Two of the 1717's go to one of the gas guys.
And he just got a blemished S 45 from Andy

[tagasagwan]

Nah! If I'm going to build a mono of that size, I have a spare 29.5cc Trevor Simpson Reed engine and a RCMK 254 EVO I can use. I have to finish my Skunk and MHZ Micro Iceberg first.

I have twin Feigao 10XL's w/ ose jacket that I got from tiqueman last year for the skunk.

I'm looking at The 200a for the Komodo but it doesn't have programcard. http://www.hobbyking.com/hobbyking/s...C_NO_BEC_.html

[srislash]

Do any of your guys have one of those S 45's? Earl was raving about it.