Feigao 540XL in UL-1 !

[Brushless55]

Just wondering if anyone has tried a Feigao XL in a UL-1?

I have a 6XL in my Erevo and that truck is nuts on 4s and outright stupid on 6s!

that motor keeps looking at me like it want's to go into the UL-1 !

Not sure if I should try it or not?

[detox]

6xl is too hot using 4s lipo in the UL1. Perfect if using 3s lipo (3s2p)

[Brushless55]

I was thinking of that..
I have two 3s I could run parallel, the same way I run my truck on the track..

[detox]

I was thinking of that..
I have two 3s I could run parallel, the same way I run my truck on the track..

Awsome. A Hydra 120 should work easily with that combo

[Brushless55]

Great to know..
What about the stock esc, would it work?

[detox]

I doubt it.

[jingalls007]

Anyone's thought's on a 540XL using 4s and a 120 amp ESC in the UL-1?

[Rumdog]

Can't beleive no one's doing this yet

[Brushless55]

That's why I'ma askin..

[rcboatfan]

just try it man!!!!

[Brushless55]

just try it man!!!!

First I want to work on my Mean Machine...
single SV motor setup, and then I might try a twin!

[Xfactor]

Im sure it will work but you probably need to step down to a 40mm or under prop maybe even a switch from x6xx series to x4xx series if a x6xx series is what you currently run.I think you could run 6s lipo on a 9xl with like a x432 thru 1732 series prop. All 32mm ,but youll probably cavitate. That's over 6oooo rpm at almost 3 hp.The motor will likely get warm too.A SAW set up?

[Brushless55]

3hp only if the motor is pulling the amps....
32mm on this hull possibly not a good idea..
9XL on 6s is about the same as a 6XL on 4s for rpm
an 8XL would be a great choice on 4s or even a 7XL on 4s would be awesome to!

[Xfactor]

Oh it can pull 100 amps but it will get warm

[Rumdog]

9xl on 6s is waaay too hot! No good!