New here does anyone know and good ways to convert the miss bud to brushless?

[srislash]

2X2 twill cloth, sand the floor with 120 grit, brush laminate epoxy on the hull floor. Not too heavy,you just want the CF cloth wet not soaked. And then roll the CF down that you cut to size before anything was done.

OH, and here is mine:

I have a Castle 1512 2650kv in it now with a Seaking 180. It is tuff to get rid of the 'flutter' in them and I believe it is from the canard wings creating the lift. I need to play with it more yet and experiment.