can i make my miss gieco 24 faster with out going brushless

[Wes Rose]

can i make these boats faster and not go brushless

[photohoward1]

Why would you want to? There is so many choices. Oh to answer the question no you can't. There really is not an alternative anymore. Brushed was a pain in butt. Brushes, Inefficiencies, heat and only one very reliable controller.

[Heaving Earth]

Use lipos if you aren't already. Good burst of speed there


Sent from my iPhone using Tapatalk

[kfxguy]

Brushless is well worth it.

[Wes Rose]

my esc os 60.amps.can go uo.to.an 8 cell battery.it says compatiable with 6 to 8 cell batterys. ps will lipos be ok on a brushed motor

[photohoward1]

Yes. Depends on the motor and the voltage. What did you have in mind?

[ray schrauwen]

Howard it's a 15 turn sealed can motor. They say it's about a 2200kv motor but, you can't really give a brushed motor a KV rating, maybe a max voltage rating.

ESC is a 50 amp 6-8 cell. 8 cells is fine but, check temps often.

One upgrade to get more speed is to use a metal prop like Octura or a CNC prop of same size and pitch. The CNC props need little or no sharpening. Stock prop is 34mm so an x435 would work or this 430 x3 blade would work depending on shaft size for prop and with that I am lost??? I have no idea what size prop shaft they used????

[Heaving Earth]

Wouldn't 4s be max voltage you want to run in it then?

6 0r 8 will be a fire no?


Sent from my iPhone using Tapatalk

[Heaving Earth]

Oh I see 6 or 8 Nimh cells.

Which is about equivalent to 2s or 3s lipos.

I run my brushed summit on lipos all the time. Wayyy more power


Sent from my iPhone using Tapatalk

[Heaving Earth]

can i make my miss gieco 24 faster with out going brushless

Dude,get a 3s lipo and a lipo cutoff. Plus a prop, you'll see a good increase in speed


Sent from my iPhone using Tapatalk

[Wes Rose]

thanks for all the help.guys.i think im gonna like this site
ill make a video tuesday when i run the boat.how can i upload it on here