Help me to choose a motor for this hull

[Rumdog]

Actually, Alpha.. He's spot on. Show me a pic of one of your boats with a motor and hardware mounted.

[siberianhusky]

http://forums.offshoreelectrics.com/...-quot-Deep-Vee
This thread is over a year long, same questions over and over again......same boring pictures over and over again....no finished boat......
This thread will be exactly the same - boat will never see water.

[Alfa Spirit]

First I have to finish the Rapid, I won a set of Scorpion HK-3026 1900kV... I have a Genesis to rebuild twin setup NEU 1512/1850kV and 2x5S. The bigger is a 50" Fountain twin setup, 4092 motors 930kV, 2x10S

[SloHD]

Needs more sponsors.

[tlandauer]

Me wants to see them motors on the edge of the table with all those nice shiny hardwares!

[Alfa Spirit]

Needs more sponsors.

Where? Have a look to the Fountain P1 scale 1

[Doby]

So finish one of the other projects you have on the go...and then start a new one. We have all seen the same pics over and over...show us something drilled.

[iridebikes247]

http://www.ebay.com/sch/i.html?_trksid=p2053587.m570.l1313.TR10.TRC1.A0&_nkw=model+boat+static&_sacat=0&_from=R40

A link to static model boat kits....take this for what you will

[Doby]

http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

A link to static model boat kits....take this for what you will

That's Funny!

[Alfa Spirit]

This one is 1600kv. It is a 500 class heli motor, has a 4.98mm shaft

http://www.scorpionsystem.com/catalog/motors/hk32/HK_3226_1600/

Chief

I have a Scorpion 3026 - 1900kV Motor is light but powerfull, with 5S that should work or a 3026 is not enough?

[siberianhusky]

Read your own thread, that question has been answered TWICE!
Or just trolling again?

[Peter A]

Wow.

[znus]

I use the HOR outboards. Two of them!



The flexshaft is 3/16" with squares at both ends, and the propshaft is 3/16 with 4 mm thread.
If you wanna run bigger props you just raise the cavitation plate with washers.



Just be really picky about lubeing the shafts after every session! You can see my oil can-mod in the pictures above

[kendt]

That thing is SICK!!! Dang I think its giving me wood.

[lenny]

Hi.
Could you please show us more of the boat and setup,
Also do you have any video's of it running.

Thanks for any input.

I use the HOR outboards. Two of them!



The flexshaft is 3/16" with squares at both ends, and the propshaft is 3/16 with 4 mm thread.
If you wanna run bigger props you just raise the cavitation plate with washers.



Just be really picky about lubeing the shafts after every session! You can see my oil can-mod in the pictures above