Mono rolling help

[SirBudman32]

No that is the Port side, ( the boat left the port).

[SirBudman32]

here is mine. You seen the video of it, Next to my daughter's modded Mini Mono it probably my best running boat.

2012-11-09 14-30-22.473.jpg2012-11-09 14-30-47.093.jpg2012-11-09 14-31-42.640.jpg2012-11-09 14-32-27.691.jpg2012-11-09 14-33-04.759.jpg

[gfm1135]

Oops. Was at work and read that to quick. Thanks. I will try and move it the starboard side and remove some more lead. Appreciate the advice.

[SirBudman32]

I have al the lead the give you with the boat in the tunnel. One at the back and one up in the front.

[gfm1135]

Mine did not come with any lead. I used wheel weight lead. Any idea how much you have in there?

[SirBudman32]

two strips at 40 oz each

[gfm1135]

Damn. 5lbs?

[SirBudman32]

OZ, not LBS

[gfm1135]

2 strips at 40 oz each is 80oz = 5lbs

[SirBudman32]

grams

[znus]

I have almost the same hull with an Etti 2970 3000kv on 3s & T120. It rolls alright

As others have mentioned - your boat (and mine) is way overpowered. I run a X438 prop on mine which does nothing to the motor & esc in terms of heat but the hull cant take anymore. You have to balace it with the rudder, so to speak. I tried an X642 just to find the limit on the motor but there was no way I could floor it. On half throttle the hull started to REALLY turn and I had to back down.

That being said - the hulls are pretty decent and imho easy to work on considering the size.

[gfm1135]

Sirbudman, what motor are you running in yours.

[SirBudman32]

Had a Turnigy 2223 2900 out runner in it in the video. Right now it has a 2835 2700 in runner in it and it is a lot slower. Going to be putting the out runner back in it. I'm running it on 3s 2200 batteries turning a 32 and 35mm prop.

http://www.hobbyking.com/hobbyking/s...er_2900KV.html