SPec motor in 33" Hydro ??

[Brushless55]

I really want to try these H-series props on it, but none in the S/B are here on OSE....
darn

[Chilli]

Contact Mark Sholund. He does good work and will hook you up with a great prop.

http://props4u.com/

[785boats]

I think you meant H-4.

No. Definitely the H-2. http://www.offshoreelectrics.com/pro...p?prod=abc-H-2

The H-4 is only 42.5 mm diameter. I don't think it would be big enough to drive the boat.

[Brushless55]

update...
Ok so I did get to race this boat for the first time in LSH this season and had issues in the first 2 heats
first run I tried a 1445 with a tip mod for more pitch and that one sucked, it could not get on plane
second heat I tried a x642 and holly cow! ran awesome and fast till I let off the throttle and lost my prop
I never did get a chance to order up some S/B props since this thread to following your guys comments, so I had a Grim 4255 and it did fine for the third and final heat.....

but I am going back in this thread to the good comments and hope to find some good props for this hull
and I am looking for a x642

[Shooter]

Not sure what hull you are running Todd, but I run the H5 in my PT Stealth w/2030 motor. It gets HOT in the summer and is virtually unusable without extra cooling, but in the cooler spring water (<60°F), it's OK. Your lower KV 1800 motor should have a better shot at handling it though....

[Brushless55]

Not sure what hull you are running Todd, but I run the H5 in my PT Stealth w/2030 motor. It gets HOT in the summer and is virtually unusable without extra cooling, but in the cooler spring water (<60°F), it's OK. Your lower KV 1800 motor should have a better shot at handling it though....

hey thanks bro, I changed up to the UL-1 2030 motor
and its the Aussie 33"