Delta Force 41 mono?????????

[srislash]

sorry man, didn't mean it that way

I just meant the vid ending,no schrapnel,no nose of boat,just gone.A very expensive run.

[keithbradley]

Here's a copy, but it handled great. I would expect the same from the DF 41:

[Make-a-Wake]

How fast do you want to go? A Leopard 5692 1090kv would run great in that boat...that's what I would use if I were building it.

He'd need to go 8s to get any decent speed

[millzee]

:

I just meant the vid ending,no schrapnel,no nose of boat,just gone.A very expensive run.

:doh

[keithbradley]

He'd need to go 8s to get any decent speed

Yes, I wouldn't run it on any less than 8s, more likely 9s.

[millzee]

Here's a copy, but it handled great. I would expect the same from the DF 41:

thanks, it looks good and will go on my list to build with a 1717 after the 35",
better yet, do ya think shipping would be cheaper to Oz in one hit

[millzee]

Ordered.

[drwayne]

Sorry guy's but I've search a little and haven't found a lot of info on handling, top speeds or set up's on this hull, can anyone share there experiences or link some threads with this boat??

http://www.offshoreelectrics.com/pro...rod=df-delta41

I'm thinking of using the electronic's out of my ex df35:
Sport boat only
Neu 1527 1.5d 1500kv
Swordfish 240hv speedo
running 6s(33,300rpm) with a X447/3 or 7s(38,850rpm) X646/3, are these prop's close?

Should I go 1/4" flex with 3/16 step down or will 3/16 be enough?

Is this worth pursuing or should I keep looking, I want to get this order in tonight, please assist.
Thanks

I said on the phone I had a DF35 Id send for postage to replace your graffiti covered DF35...
save the coin for the missus+squids next holiday..
W

[millzee]

sorry man, I forgot about that one but it's too late, all done. We hope to come to SA to go fishing as a Family very soon, here's to hoping.

[Chrisg81983]

First finish your twin sprintcat but on the df 41 I run a 1527 1y on 6 and 8 s and on 8s I am getting speeds in the very high 60's and on the last run my eagle tree said 71 but I think something was off with that but I am using nothing smaller than 450 3 blade as anything smaller can't even get the boat on plane it ran horrible with a 447 but the df 41 is a great hull one of my favorites


Good luck chris

[millzee]

thanks mate, advice taken and the cats the next thing going on the building table as soon as the sheds tidy and user freindly again, I've let it get pretty bad so tonight I'll finish cleaning and get into it again in a day or so, no paint, just drive shafts, trim, program and seal the hatch and I'll have the first video

[millzee]

I just received the df41, Thanks steve!!!!!! My sheds full again, now I've got the cat to finish, then a df29, df35, df41, I love my mono's. After seeing this hull I have another idea in mind for a set up in this beast.

[Chrisg81983]

Millzee I would recommend putting a strut on it not a stinger it makes dialing in much easier and watch placement of hardware as the transom is tight for space if you want to use trim tabs I will send you some pics of how laid it all out if u want let me know

Chris g

[millzee]

I might try fitting two? Need to have a good look tonight when I have some more time, thanks.

[drwayne]

Danny, mate .. finish what's on your plate before you grab for more.