Neu 2215 Motors

[Flying Scotsman]

Thank you Darin..& guys. . Funny how the hull is now the most affordable part of the equation. Possibly next year I'll be ready.

Tom, that is not the funny part, they should be one of the major costs IMO, as far as quality and design features. We spend too much dough on questionable quality for esc's.

Douggie

[SJFE]

We spend too much dough on questionable quality for esc's.

I agree 100%. I await a budget controllers from CC. Maybe I should not hold my hand on my back side to long in the process. Funny is not the term I should have used. Sadly is a beter word.
Tom

[calcagno45]

I agree 100%. I await a budget controllers from CC.

Can I ask the question why a couple of $1 electical parts put together cost to darn much?

[Steven Vaccaro]

Guys please don't highjack my thread. There is plenty enough bandwidth to start a new one

[calcagno45]

NICE motors! and price

[Bill-SOCAL]

Sorry. But if it makes any difference I am thinking hard about what I can slap one of them into!! The photos show a finned version. Is that what you have or do you have the smooth canned version??

See, back on topic!!

[SJFE]

Sorry all I did was ask a question and look what happened.

[Steven Vaccaro]

Sorry. But if it makes any difference I am thinking hard about what I can slap one of them into!! The photos show a finned version. Is that what you have or do you have the smooth canned version??

See, back on topic!!

Neu told me that they only come finned. I also have the longer 2230 version coming.

[SJFE]

How do the numbers relate to the motors again????

[TeamFubarRacing]

How do the numbers relate to the motors again????

examples:

1521 1Y/F

[15] Stator Dia. 1.5 inches
[21] Magnet/Rotor length 2.1 inches
[1Y] one wye wind
[F] finned case

1527 1.5D/S

[15] Stator Dia. 1.5 inches
[27] Magnet/Rotor length 2.7 inches
[1.5D] 1.5 delta winds
[S] smooth case

Ron

[SJFE]

Thanks Ron. I filed that.

[Steven Vaccaro]

Ron I thought the first two numbers were the can diameter? For example a 2215 has a diameter of 2.26"

[Bill-SOCAL]

Neu told me that they only come finned. I also have the longer 2230 version coming.

Might have to "roll your own" for cooling Unless the fins are sufficient, which in a sealed FE boat I wonder about. Either way, Neu motor are my New Religion!! I'll figure something out!!

[Jeepers]

[QUOTE=Bill-SOCAL;31682]Might have to "roll your own" for cooling QUOTE]

my experience with the 1521 series motors, they dont seem to run hot. I wonder if those BIG motors are the same.

[txboatpilot]

I cant wait to try out one of the 2215's.... I had one reserved, to bad the one Steven got in, was 5mm shaft..

Hopefully the 8mm will be in SOON!!