Genesis catamaran ???

[Jeff Wohlt]

Can anyone give me a link to order a hull to do a twin?

[Alfa Spirit]

Sorry I can' t, this hull is a present from the manufacturer

[FighterCat57]

Just send a message to one of the eBay re-sellers and ask for a plain hull. I don't think there are direct links. At least not that I have found.

The EKOS hulls are going to be in within the month and are 140 tower member price.

EDIT: unless the context of your question is looking for a Genesis, then I'd say just get one, they are cheap. =)

[Jeff Wohlt]

I do want the gen version. Want o make something bad- azz out of it for 6S a side :)

[ED66677]

I do want the gen version

me too!

[Alfa Spirit]

I' m waiting for Raceboats powertrims and a 120mm Hopf rudder

Here are the parts, very high quality, there are 3 ball bearings in the tube

Raceboats Shop : http://www.rc-raceboats.de/shop/index.php?language=en

[Alfa Spirit]

I received the Hopf rudder with 12cm blade not new but never used. I will change the screws with allen inox screws and I will put a nylon pastic screw.

[Rumdog]

sweet! ow's that HOTR hull coming along?

[Alfa Spirit]

Are you talking about my HOTR cat? I' m finishing the paint job

[Make-a-Wake]

My RC buddy and I went out today for some boating....... he brought his stock genesis to play with one last time before he dismantled it for the twin castle/Neu's that are sitting on his desk, along with the two turnigy 180a's.


Well........i brought a bunch of charged up lipos.............i handed him a couple 2s

He strapped 'em in..........Taped the hatch and i gave it a toss.............

He proceeded to give it about 1/2 throttle according to him.............

It leapt darn near OUT of the water! "This esc is really touchy" He let off and throttled again slowly.......up and up........it was going like a friggin' missle............"maybe my throttle trim is up higher than last run?"(39mph a couple weeks ago) he said..........

Then he said.........."what batts are these?"............i thought about it ..............and then remembered at that moment that i handed him two 3s 4000's!!!!

At the same exact moment it completely shredded off the prop blades.....leaving it to sit proudly in the center of the Lake..........

Pushed it in with one of my boats..........

Then he completely dismantled it on the spot...........and gave me all the gear for $65...........thanks bro!

Another day at the lake........

[Alfa Spirit]

You' re a lucky guy!

Here is my setup for the cat

[Alfa Spirit]

Any suggestions are welcome

[questtek]

You might find this information that was just sent to me of interest. I am just passing it on for reference.

1. The stock Genesis set up sold by by HobbyKing uses a 3674 2-pole brushless motor with Seaking 90A ESC turning a P1.4x 38mm Dia nylon prop. Stock speed is 60 kph or 37 MPH
2. The upgraded Genesis set up consists of a Leopard LB4074 4-pole brushless motor and Seaking 120A ESC turning a metal prop P1.4 x 40 mm dia. Stock speed with this set up is 75 kph or 47 MPH
3. The ultimate set up consists of two Leopard LB4074 4-pole brushless motors and Seaking 120A or upgrade to Seaking 180A ESC’s. Estimated speed in excess of 60 MPH.

[lomdel]

How can one order the boat with nr. 3 set-up installed as above? Where did you get the info?

[tiqueman]

Youd have to get the empty hull and build it yourslelf. Its not offered RTR for options 2 and 3