Genesis catamaran ???

[R1 Seven]

Thanks for posting the question. :)

I did a quick search and found it in the thread...here is a link to the specific post...

http://forums.offshoreelectrics.com/...7&postcount=74

[rchippie]

Thanks for posting the question. :)

I did a quick search and found it in the thread...here is a link to the specific post...

http://forums.offshoreelectrics.com/...7&postcount=74

I was going to PM you the link when i got, but you beat me to it .

[Alfa Spirit]

I' ll build parts to have a perfect mounf for Octuras X442 and X442R with bullet nuts

[rchippie]

For those of you running the Genisis on 4s . Were are you placing your lipos in relation to the stock battery tray ?.

[Alfa Spirit]

Raceboats stingers are long enough (13 cm), I can mount X442 or X447 using the bullet nuts and position of the propellers will be perfect for this hull
Very clean mount. Thanks to VV, nice parts my friend

[Alfa Spirit]

Here is the setup for this 39" cat, propellers will be X442 or may be X447
Give me your advice guys,
First 2x5S or 2x4S?? 35000 RPM unload?

[Alfa Spirit]

What setup would you choose? 2x4S or 2x5S for this cat?
Is 35000 RPM unload a good value?
ThX

[HYDROJERRY]

GOT MINE TODAY,,,YYiipppeee, cant wait to get it wet,,Thanks again Alfa for the hook up on where to get it sence everywhere was backordered.....

[Dangerous_Toys]

GOT MINE TODAY,,,YYiipppeee, cant wait to get it wet,,Thanks again Alfa for the hook up on where to get it sence everywhere was backordered.....

I'm waiting for mine. They sent me an email stating that it got shipped today EMS from HK. How long does it take for delivery to the states?

[HYDROJERRY]

If you dont have lipos in that order i would say like 2 or 3 weeks,,eeeek.

[Boaterguy1000]

My brother has the hoobyking genesis and he says the hull cant handle the power and ties itself in knots, he had sss4082 motor, octura m447 prop on 6s, any help or thoughts thanks

[Steven Vaccaro]

What kv is the motor and can you describe the problem In more detail?

[Thunder29]

I run a 4084 leopard 1800kv with seaking 180A ESC on my Genesis with a 40mm 1.6 high pitch prop and offset rudder. It's a good setup for 6S. Temps on batteries/ESC/ motor are all right around 105-115 after a good hard run.