Experience with a Turnigy T5692 1320KV motor???

[jcald2000]

Do you know that motorhas a 30,000 rpm limit???

[oscarel]

Do you know that motorhas a 30,000 rpm limit???

Where is that info located?

[puttekula]

What esc and batts are you using?

[JIM MARCUM]

Do you know that motorhas a 30,000 rpm limit???

I have tortured my 5692s to 2860s well beyond the "safe" limits published by Leopard, and have yet to have one fail. In my highly biased opionion, as long as you don't over prop them or have coolant failure, you can add 50% to the rated max RPM for SAW racing. That would be 45,000 RPM in this case. For Offshore, sprint & oval racing I'd aim for the 35,000 to 38,000 RPM range as a "reasonable" limit. JIM

[Make-a-Wake]

I just got back from my 5th or 6th run with my T5692 1000kv on 8s. I love this motor, sounds cool as heck and has some gonzo torque to it......................5 stars from me.

[oscarel]

Just got this key chain hd camera off ebay and attached to top of cowl. This was 6S per, had a problem with receiver battery so it was a quick run.

http://youtu.be/NaHsZMRUx1Q

[Brushless55]

I wonder how well one of these T5692 1000kv motors on 8s would fair in a F41 Cat?

[oscarel]

I tried one of the 1340's and it wasn't that impressive, maybe just my setup though.

[Brushless55]

I tried one of the 1340's and it wasn't that impressive, maybe just my setup though.

In a 41" cat?

[oscarel]

http://forums.offshoreelectrics.com/...yker-F41-Build

Again, it may have just been my setup.

[oscarel]

And now that I think about it, I was only running 5 degree timing. I'm now running them at 20 so I may try it back in the Stryker in a couple weeks.

[Brushless55]

And now that I think about it, I was only running 5 degree timing. I'm now running them at 20 so I may try it back in the Stryker in a couple weeks.

Yeah, let us know how the higher timing works in your Stryker
Ide like to try a 8s or better yet 10s setup, but I'm getting more 4s packs so I will probably stay with an 8s setup