Spektrum radio / Hydra 120 compatible ?

[cacofonix]

ok folks, i found problem !!!

i recalibrate esc after changing radio EPA to 80% ...just to check

and ....no change

BUT !!! , since the beginning, i made all tests by unplugging motor after calibration

and this time , i try full throttle WITH motor plugged .........

and and and : LED IS FULL ....... unbelievable, esc behaviour is not same with or without motor plugged.

herve

[nutz1207]

wow, maybe that is the problem for me to, i will check this when i get home. im just a little uneasy about going full throttle with the motor pluged in.

[nutz1207]

well that was it. recalabrated esc, left motor plugged in and tried full throttle and had solid red led. im with you cacofonix it doesn't make any sense that the motor would have to be plugged in. but it worked. but i thought that i read a post from joe that you should unplug the motor when you check for full throttle. maybe thats just for saftey.

also want to say thanks to everybody for there help. its nice to now that people are here to help when you need it.
Dustin

[cacofonix]

yesssssssss good to find help and help others

problem leaving motor plugged is just noise !!
when doing my test yesterday, all familly went in workshop to understand what was making such noise !!!!

herve

[cacofonix]

hi

to be complete on this subject, this morning i redo all but after upgrading ESC to 1.04 version
same behaviour
blinking without motor
full with motor

if joe has an explanation to give ....

herve