After testing various motors on my MM I am running it now with an outrunner Align 600XL 1700KV on 6s with a 440/3. I have a made a carbon cooling jacket for the motor (the external casing does not rotate) Speed is abt 45 mph and motor temp is 150 F
About 3-4 mins. I also tried the 9XL on 4s but motor temp was a bit higher
thanks was just comparing to mine running a 8xl on 4s m440/3 is around the mid to high 40s and motor at bearings after 2 min is around 110 f esc caps the same
mine is 8mm from bottom of strut to bottom of sponsons and prop up about 2 deg, has a nose up attitude
running like this on fairly flat water its really stable speed is around 45 mph
but were i run has lots of cross winds and gets choppy a lot, but this is when the MM loves it the most and i pickup 3-4 mph
couldnt get mine to run properly on anything less than 8mm, just wanted to porpoise,
Comment