Black Pearl II Hydro - 2020

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Shooter
    Team Mojo
    • Jun 2009
    • 2558

    #196
    The 1814 that I borrowed from Tom wasn't even pulling as much current as the H5. Was also 2mph slower. When I ran the original 1814 that Terry gave me, I gained 6mph and quite a bit of current to go with it, so I agree, something wrong with that prop. Probably cut down too much on the diameter.

    Larry, I've been running a custom wind TP motor with 2400KV. 4S2P. Typically I run the H5 prop for 70mph. The original 1814 was running 76mph, but drawing too much current for every day heat racing.

    Comment

    • Shooter
      Team Mojo
      • Jun 2009
      • 2558

      #197
      And yes.....the boat is very low profile. The lower the cg, the better for turning. That's why I've always been a strong supporter of super light vacuum formed cowls.
      Attached Files

      Comment

      • eric113
        Senior Member
        • Sep 2011
        • 323

        #198
        Originally posted by Shooter
        And yes.....the boat is very low profile. The lower the cg, the better for turning. That's why I've always been a strong supporter of super light vacuum formed cowls.
        Add me to list, when you do another batch of them for hull I bought from you. Please and thank you!

        Comment

        • Shooter
          Team Mojo
          • Jun 2009
          • 2558

          #199
          Hi Eric. Unfortunately, the new cowl will not work on your boat. The deck curvature is different.

          Comment

          • Shooter
            Team Mojo
            • Jun 2009
            • 2558

            #200
            Tyler Davis throwing down some laps in under 11s!!!!

            Comment

            • TRUCKPULL
              Fast Electric Addict!
              • Apr 2007
              • 2969

              #201
              Originally posted by shooter
              tyler davis throwing down some laps in under 11s!!!!

              https://youtu.be/q-gea858fnw
              NICE!

              Lj
              Past NAMBA- P Mono -1 Mile Race Record holder
              Past NAMBA- P Sport -1 Mile Race Record holder
              Bump & Grind Racing Props -We Like Em Smooth & Wet

              Comment

              • T.S.Davis
                Fast Electric Addict!
                • Oct 2009
                • 6220

                #202
                He wasn't really pressing. Not very close to the pins. We wanted to know if it would make the laps as he broke his batteries at the last race. Clipped a couple buoy resulting in extra laps and angry cells. Everything was manageable temp wise after this run.
                Noisy person

                Comment

                • T.S.Davis
                  Fast Electric Addict!
                  • Oct 2009
                  • 6220

                  #203
                  BTW I timed laps on Ty's LSH. Human eye, fat thumbs, blah blah blah. I had him at 11.05 to 11.96 seconds/lap for 6 laps. Pretty slippery that one. Think I have video of that one somewhere.
                  Noisy person

                  Comment

                  • T.S.Davis
                    Fast Electric Addict!
                    • Oct 2009
                    • 6220

                    #204
                    This run was so fast it made it into the future. haha
                    Noisy person

                    Comment

                    • TRUCKPULL
                      Fast Electric Addict!
                      • Apr 2007
                      • 2969

                      #205
                      Originally posted by T.S.Davis
                      This run was so fast it made it into the future. haha
                      https://youtu.be/oiedfEsz3UU
                      For a Spec Sport Hydro - that is moving, "P" Sport Times.

                      LJ
                      Past NAMBA- P Mono -1 Mile Race Record holder
                      Past NAMBA- P Sport -1 Mile Race Record holder
                      Bump & Grind Racing Props -We Like Em Smooth & Wet

                      Comment

                      • eric113
                        Senior Member
                        • Sep 2011
                        • 323

                        #206
                        Originally posted by T.S.Davis
                        This run was so fast it made it into the future. haha
                        https://youtu.be/oiedfEsz3UU
                        Damn, I need pearl LSH.

                        Comment

                        • Shooter
                          Team Mojo
                          • Jun 2009
                          • 2558

                          #207
                          Good news. The first saleable V12 P-Sport is on the way. If everything looks OK, I'll give the green light to have the rest of them made. So, if you're on the list, it won't be long now. Thanks!

                          Comment

                          • lars_01
                            Senior Member
                            • Nov 2009
                            • 112

                            #208
                            Hi! Can you put me on the list too?
                            Best, Lasse
                            111

                            Comment

                            • Shooter
                              Team Mojo
                              • Jun 2009
                              • 2558

                              #209
                              Absolutely. Thanks Lars!

                              Comment

                              • Shooter
                                Team Mojo
                                • Jun 2009
                                • 2558

                                #210
                                Hi everyone. The first V12's arrived. Everything is fitting very well, so I will go ahead and order more for stock. PM me if you are interested. Thanks!
                                Attached Files

                                Comment

                                Working...