Jet's Latest Hair-Brained Idea

[RandyatBBY]

There is tons of room in the hull hear is a 480 size motor in this one.

[Sneasle]

Nice.. So in for one.

Let me know how I need to send you the purchase info.

Also, are we getting both hatches, or do we need to request which one we want?

[RandyatBBY]

Nice.. So in for one.

Let me know how I need to send you the purchase info.

Also, are we getting both hatches, or do we need to request which one we want?

You can Pay with Pay Pal, Credit card or Money order. If you want to order over the web with credit card, Just order a Micro Hydro and I will put in the right one. You can have either or both hatches, No problem just tell me what you want in the special instructions.

[Sneasle]

Awesome.

I'll get it ordered tonight or tmrw.

Can I request a few extra decal sheets? I only got one when I ordered those five hulls a while back and I'd prefer to be able to better advertise where I got the hulls from when I am done :)


480 sized motor... seems a bit much to me? Or did you just do that for picture sizing purchases.


edit:

Question guys, I need a new surface radio, looking at 75mhz or 27mhz, is either preferred over the other?

[RandyatBBY]

Awesome.

I'll get it ordered tonight or tmrw.

Can I request a few extra decal sheets? I only got one when I ordered those five hulls a while back and I'd prefer to be able to better advertise where I got the hulls from when I am done :)


480 sized motor... seems a bit much to me? Or did you just do that for picture sizing purchases.


edit:

Question guys, I need a new surface radio, looking at 75mhz or 27mhz, is either preferred over the other?

Wow shame on me I must have been out of decal. I will try to remember, I will make it a point in fact.

Ya just for sizeing, the 75mhz you have more channels to choose from.

[Sneasle]

Just placed my order Randy. I asked about a non turbine hatch for the MH as well as I think I heard it mentioned at one point.

Let me know when you get it out, I look forward to getting it.

[RandyatBBY]

Just placed my order Randy. I asked about a non turbine hatch for the MH as well as I think I heard it mentioned at one point.

Let me know when you get it out, I look forward to getting it.

Thanks for the order. The other hatch is this one it is the first one I ran on the MH.

[Sneasle]

No problem. I love shovel nose hydro's and this will give me a chance to own my own finally :)

Ah, Do you have any of those hatches left by chance?

[Sneasle]

hmm.. would a 480 be too much motor for one of the MH or the MP or the MSC hull? IF so, what the max size motor that is recommended? I feel kinda like horribly overpowering one of my hulls.. but I don't want to flip/sink it on the first push of the throttle.

[JimClark]

I am thinking 400 size but I am going to try one of the Doc's Chinese Outrunners 300KV on 2s Lipo

[Sneasle]

Ya, I've got 2 of those outrunner/esc combos. I plan on building a MH to Doc's plans and then a MP in a similar fashion. That still leaves me with 1 MH, 1 MP, 1 MSC, and 1 SNMH to power.........

[RandyatBBY]

With NiMh cells it will not be over powered and you can get acustom to driving the hull then when you want more speed install the 2S lipo. Allways start with the small prop and work your way up. Once the boat is dialed and you have more stick time you will be able to handle the faster boat.

[JimClark]

I meant 3000KV. How come we can't edit our own posts any more. I thought it was only turned off in the buy and sell

Jim

[Sneasle]

I think you can only edit for 30min after the post.


To about how much power is a 1/8" flex shaft good for?

[JimClark]

Not sure I was going to do a .062 wiredrive in mine.
Jim