major mods to motley crew

[rayzerdesigns]

let me know what you find randy..im still new to the boating thing..would like to hear more on that

[flraptor07]

I was gonna ask how much weight it gained but I saw where you're sending it out to get the mold made, so you're just using this as the plug for the mold. If it works, I may be interested in one.

[RandyatBBY]

Ya when I looked at my boat it was the right side that was lower.

[rayzerdesigns]

So u think that is on purpose randy??

[RandyatBBY]

Yes with the strut more to the left from center the left sponson is less in the water and slides over the water easier. Also rounding the inside corner from about center foward helps too. But keep it sharp from there back to help release of water.

[rayzerdesigns]

Will be trying to finish sand everything this weekend and during next week Randy. .plan on sending u r way on or right around 20th

[rayzerdesigns]

An interesting mod, what are you hoping to accomplish? When we were designing this hull the front non-trip "step" was added for...well I don't know why it was added. I wondered how the hull would work without it, although the boat runs very well with it. I really like my MC, as I modded it it is a bit different power-wise but it is a contender. Keep posting your results.


What mods did you do to.yours??


.

What mods have u done to yours??

[Fluid]

What mods have u done to yours??

Mostly interior: cut out the tub liner, stiffened the tunnel, blueprinted the bottom.

234qg.jpgbeauty.jpgfghj6.jpg

[rayzerdesigns]

Looks good..that's what I did to my current mc..I'm excited to get new hull done and try it

[larryrose11]

rayzerdesigns,
I understand Randy is doing the molds for you, are you going to do the layup yourself for the new hull, or Randy to the rescue?

[RandyatBBY]

Just watching

[rayzerdesigns]

well while waiting for boat to come back from being molded..decided to paint my cyberstorm

[RandyatBBY]

Got my hands on the plug yesterday. Started with 320 cleaned the few little imperfections. I found two low spots, spot puddy them. It is curing now.

[rayzerdesigns]

Getting excited

[RandyatBBY]

I still have to glue it all together, seal seam and wax 3 coats on and spray on PVA before I make a mold to make a boat. also need to make the deck mold too. but making progress