Aeromarine Team Believer with updated hatch build. Special

[rearwheelin]

This is the ESC wiring in a nut shell. Thermal switch at the battery lead caps and block. If either one of the switches close it sends power to the lights and pump. 3s lipo will power lights and pump directly and power my CC BEC wich will run the reciever and esc . I mounted the esc on and off switch directly to esc via puty .
image.jpg image.jpg

[rearwheelin]

image.jpg

[Fella1340]

It turned out really nice. I like the fesh ideas, you can't beat the lexan for the price and strength. I'm going to pick up some smoked lexan for use in future builds. The boat has an industrial feel to it with the use of thermal switches and fault lighting. Plus the use of check valves, tying the pump into the thermal switch logic and utilization of materials adds to that feel. Lets see some video of it getting wet! Great job.

[rearwheelin]

Thanks Fella1340 for your commentary , I appreciate that you fully understand what this build is about !

I'm waiting on a couple minor things then I will start water sealing the hardware and then it won't be too long for a 4s maiden run . I will more than likely end up ordering 5s and 6s packs. I have a 1717 CC that I know will be run on 6s but this TP I'm not sure of yet :)

[rearwheelin]

It's really close : http://youtu.be/5s4N9gM11tc

[rearwheelin]

One thing I noticed is this oiler setup really pushes lots of oil forcefully ! Straight away when giving it throttle is pushes the bushing out . I don't want the bushing out that far so I installed a couple o-rings for a bushing bump and see how that goes. I'm confident there won't be enough shaft flex to drive into them very hard.

image.jpg image.jpg

[rearwheelin]

Receiver mount, lexan, cheap, easy

image.jpg

[rearwheelin]

For those gps runs the BEC on the esc will power the garmin.
image.jpg

[rearwheelin]

That's flowing threw esc and speed control !image.jpg

[rearwheelin]

I decided on a new light already ! It's really bright lol

image.jpg

[Fella1340]

oh boy, thats some serious lighting! What have you got up your sleeve now?

[rearwheelin]

oh boy, thats some serious lighting! What have you got up your sleeve now?

I already had one of the hood lights go bad and can figure out why so I bought this brake light . The wires on the hood light are very weak so I can't depend on them. The brake light is cool but too big and hard to mount so it's going to get returned for some LED flush mount street bike turn signals that will go where the chrome ones are. They are pricey but I can get them in white light and should be better for night runs.

[rearwheelin]

4 mini spot lights going in the hatchimage.jpg

[kfxguy]

I can tell you like gadgets. I'm the same way!

[Luck as a Constant]

i like some of the ingenuity going on here... looking good