Here is the start of my rebuild on my fantasm.IMAG0807.jpgIMAG0808.jpgIMAG0809.jpgIMAG0810.jpgIMAG0811.jpggoing to remove all wood and replace with carbon fiber brackets for rudder and stuffing tube. filled small nick out of nose and filled hatch latch holes with finishing resin.
fantasm 41 build
Collapse
X
-
IMAG0812.jpgIMAG0813.jpgIMAG0814.jpgIMAG0815.jpgIMAG0816.jpg picture 2 is all the old stuff that i took off which was 80mm stingers ,4mm shafts , scale rudder and misc. picture 3 is all the new stuff going on when paint gets finished 100mm stingers ,3/16 flexshafts ,new collets , carbon fiber piece that i will use to build brackets,motors and esc's. not really sure if i need to have the bracket for the scale rudder since i have never used a scale rudder? kind of hoping it works without the giant bracket to hold the outer sleeve of the wire. if anyone knows please let me know.Last edited by Vin-m; 08-01-2014, 03:38 PM. -
IMAG0817.jpg tp 4050 2220kv and 180 amp esc 8mm bullets on everything.either going to go 4 or 5 cells using a 1.4 46mm prop.hoping to go around 60mph with this with nice long runs. not a big fan of swimming for my boats ,theres alligators here in florida lol. Off to paint shop next week for a cheetah print liquid dipped paint job.graphics will be done by monojeff and be chester cheetah the cheetohs mascot .deck one will be him laying down like the miss geico lizard in a similar orientation. hopin they arrive in time i was going to get them on before clear coat goes on so they look painted on for a more finished look.Last edited by Vin-m; 08-01-2014, 03:41 PM.Comment
-
Sounds like a nice fun boat !"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
dropped off boat at paintshop today ,get her back next friday the 15th.i changed the paint scheme cause my graphics were not done yet,they will have to go on my next boat build i guess. here is what i went with for this boat.WTP-581_Proveil_Reaper_Z.jpg .Comment
-
IMAG0829.jpgIMAG0830.jpgIMAG0831.jpgIMAG0832.jpgIMAG0833.jpg
Boat back from paint!!!phone camera picturesLast edited by Vin-m; 08-15-2014, 05:50 PM.Comment
-
-
That looks killer!
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
thanks everyone. im really happy with the guys at liquid images. the holes were drilled before paint tlandauer otherwise i probably would not have been able to lol. would of been a shelf queen. got 7 days to wait for clear coat to cure then its assembly time .cant wait to get her in the water.Comment
-
Comment
-
thanks everyone. im really happy with the guys at liquid images. the holes were drilled before paint tlandauer otherwise i probably would not have been able to lol. would of been a shelf queen. got 7 days to wait for clear coat to cure then its assembly time .cant wait to get her in the water.actually it looks so good that I did not notice them! Enjoy your build!
Too many boats, not enough time...Comment
-
Nice man!.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
Comment