38,8" MHZ Racemaster build

[Darkcyber]

Hello all!
First. Sorry for my english. I will try to write easy and correct. If you are see my mistakes, plase, correct it at private message.

I want to tell you my story about MHZ Racemaster build and will post fotos and videos from the swimming.

Specifications:

Hull - 38,8" MHZ Racemaster carbon/armid
Motor - Leopard 4092 1390kv
ESC - Etti HV Opto 220A
Battrey - 2x4S Gensace 50C 7000 mah
Prop - different, graupner 42x1,4 and Octura 445, 545, 645. And I want to try octura 447 next time.

Are some of the first fotos next.

I was recieved boat hull, good color, I like it.



First, i was strength the transom, 2mm full carbon.


Receiver pack for receiver and servo.


Motor with mount.


This is all. Thank you for reading. I will continue if you are interestiong. Now, boat is a close to the final stage.

Best regards, Maxim.

P.S. To moderator: can you delete the "build" word from the thread? I can't do this.

[cugino]

You can go to X452 with safe temperatures. I have almost same hull with 6S and 1600KV with X450 and everything cool.

[Darkcyber]

You can go to X452 with safe temperatures. I have almost same hull with 6S and 1600KV with X450 and everything cool.

Thanks! It will be good, I will start from 445 for the safe ampers and temperature. Will be choise bigger props if all is ok with this one.

[Djimpuls]

be sure to invite to the test !

[Darkcyber]

Some photos of the next step

First organization:


First hole:


Carbon parts for the boat are doing with myself draws



Brss tube holdes from Zavarsky

[Darkcyber]

Flex shaft line complete




Battery plate


to be continue...

[srislash]

Can't wait to see this run. I like these hulls, subscribed!

[Darkcyber]

Can't wait to see this run. I like these hulls, subscribed!

I am too. It will be next two month, i think.

[Darkcyber]

There are two last photos.




Next one will be at the end of february, i will paint the racemaster.

[Darkcyber]

There it is the first photo of my boat air coloring process

XtuGRuz9UGQ.jpg

[flraptor07]

There it is the first photo of my boat air coloring process

[ATTACH=CONFIG]112007[/ATTACH]

WOW! I can't wait to see that with some clear on it!!

[Darkcyber]

Hello all! I like to present you the finally colored MHZ Racemaster "Red Dragon"

It is have a some problems now, they will be solved at one month.

[flraptor07]

That paint is wild, I really like the "Red Dragon" theme

[Fella1340]

Very nice job.

[Darkcyber]

There are the first run of the Red Dragon.

We have only one good video, sorry. Runs will be continue...