MHZ mystic 1380 - Motor/ Esc combo?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #16
    Originally posted by Chrisg81983
    Awe thanks for including me here kent lol what happened to you this morning meaning morning your time
    On the Phone LOL .... taking after my girl! hehe ... will hit you up tonite

    Sorry for the hijack and getting personal with Chris.!
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"

    Comment

    • MrDriveby
      Member
      • Aug 2013
      • 61

      #17
      If I had the opertunity now to buy the Lehner I would, the problem is that my other girlfriend getting kinda jealous:-D And also just went for a new, bigger house. Always a money pit with new houses, but can't live without a 138 LOL. Already been on www.customcfparts.com several times, the boat needs to be just as beautiful on the inside as the outside. This is how I like all my girlfriends:-D

      Comment

      • nata2run
        customcfparts.com
        • Nov 2011
        • 1837

        #18
        Originally posted by MrDriveby
        If I had the opertunity now to buy the Lehner I would, the problem is that my other girlfriend getting kinda jealous:-D And also just went for a new, bigger house. Always a money pit with new houses, but can't live without a 138 LOL. Already been on www.customcfparts.com several times, the boat needs to be just as beautiful on the inside as the outside. This is how I like all my girlfriends:-D
        Agree well said.... Thumbs up for good looking girlfriends/wife's LOL
        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
        "Follow someone's footsteps and you will always be a step behind"

        Comment

        • MrDriveby
          Member
          • Aug 2013
          • 61

          #19
          Since i'm looking for some good runtime with smaller props, the 1000kv has a smaller amp pull then the 1150. And you can also get some serious RPM if you go up to 12s on the 1000kv motor. So i'm leaning against the 1000kv motor with the SF300aPLUS esc's in the beginning.

          Pretty sure i'm going to end up with some lehner 3040/3060 in the end with the MGM esc's:-) Time will show.

          MHZ Germany had some some shipping time on the hull, so it's not arriving before september.

          The drives and motormounts will be ordered from mbp-de.com shortly, anyone who can give me some advice on the motor mounts (Singel or double)? They are 3mm CFK, seen some who takes two so its 6mm.
          Going to run with rear supports on the motors as well.

          Kent: Can you make a special "theme" on the interior? haven't decided any graphics for the boat yet. Will run this by a local airbrushpainter to see if he has some good ideas and ofcourse see if I can afford it now or if I have to do this at a later stage.

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #20
            Hi I can definitely help you with some interior, even the motor mounts or if you want a double pair (6mm) and want them branded. Maybe have a think about a theme or brand and let me know.
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • iridebikes247
              Fast Electric Addict!
              • Dec 2011
              • 1449

              #21
              If I were you I would buy 2 sets of motor mounts. They're really thin from mbp and also MHZ. I sandwiched two together. I'm not saying this is ideal but I have no access to a cnc machine and am a little light in the tool department. You can buy one, trace it, and cut out another from carbon if you'd like. The 1000kv on 12s will be very very fast.

              Motors are really heavy as I'm sure you know it pays to have them attached to 6mm plate lol. I have seen Kent's work in person its just awesome definitely the way to go. Not many people come up with the stuff he doesso maybe he can make a mount for you
              Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

              Comment

              • MrDriveby
                Member
                • Aug 2013
                • 61

                #22
                Aah you can make some motor mounts as well. Rear support to or? As i posted earlier, first time buiding a boat from scratch so going to dig for good tips regarding, mounting positions when the time comes.
                Looking for a solution for the batteries, like the sliding design, but on 11-12s maybe the will be a little bit to small. On the other hand having the batteries as far down as possible must be a plus.

                Its a lot of planning to get it perfect:-P

                nice Tag Heuer design on your boat, like the lines from front to back.

                Comment

                • MrDriveby
                  Member
                  • Aug 2013
                  • 61

                  #23
                  Mike, do you have rear support on your motors or only the double in front?

                  Comment

                  • nata2run
                    customcfparts.com
                    • Nov 2011
                    • 1837

                    #24
                    Can also work out the lipo slide system for you for 12s. Here is my new design of TAG just for some inspiration.
                    Attached Files
                    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                    "Follow someone's footsteps and you will always be a step behind"

                    Comment

                    • MrDriveby
                      Member
                      • Aug 2013
                      • 61

                      #25
                      Stunnig! Love the style, clean and exlusive look both inside and out! What kind of wires are you using for the motors here? Watercooling hoses in matching colors, pure art!

                      Comment

                      • MrDriveby
                        Member
                        • Aug 2013
                        • 61

                        #26
                        Taag Heuer logos: Decals or painted? Either way looks smooth!

                        Comment

                        • nata2run
                          customcfparts.com
                          • Nov 2011
                          • 1837

                          #27
                          Originally posted by MrDriveby
                          Stunnig! Love the style, clean and exlusive look both inside and out! What kind of wires are you using for the motors here? Watercooling hoses in matching colors, pure art!
                          Thank you!! Just using normal silicone coated 10 gauge with mesh wire wrapped. ESC's has double wires on all output stages.
                          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                          "Follow someone's footsteps and you will always be a step behind"

                          Comment

                          • nata2run
                            customcfparts.com
                            • Nov 2011
                            • 1837

                            #28
                            All decals no paint other than AMG silver on hull
                            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                            "Follow someone's footsteps and you will always be a step behind"

                            Comment

                            • MrDriveby
                              Member
                              • Aug 2013
                              • 61

                              #29
                              Clear on top of the decals? Looks so even so looked more like a paintjob, stunning! Love the mesh wire wrapping, where did you get this? What I love with the HPR's is that they have carbon on the inside of the hull, MHZ carbon/amarid the kevlar is yellow so when you put your work inside it doesn't look so complete. Maybe just put some carbon cloth on top with epoxy to get the look maybe?

                              Comment

                              • MrDriveby
                                Member
                                • Aug 2013
                                • 61

                                #30
                                Take it back! Looked at some of your videos and the "yellow" is alsmost non existing! The MHZ 138 had looked great with the custom carbon! In my head the colors crashed between the carbon parts and the carbon/amarid

                                Comment

                                Working...