BBY Micro Turbine Hydro for SSSH

[Sneasle]

looks pretty darn good.

What coupler/driveline/prop are you using?

[JimClark]

Where is you CG with the batteries that far back?

[mikesf]

Haven't run it yet but the battery can move forward and backward freely so I can adjust it. What should be the balance point in these hulls as it is my first one(lot's of monos) and I am very excited with it...

[mikesf]

looks pretty darn good.

What coupler/driveline/prop are you using?

Thanks, actually a friend of mine (he is into scale models) has dealt with the looks of the model, I am just a speed freak...

Coupler is an ETTI 3.2mm to .130 flex, added a little piece of antenna tube at the flex so it matches the coupler... Prop is stock, 29mm I think...

[JimClark]

guessing .75 of an inch to maybe 1 inch behind the back of the sponson

[mikesf]

I am almost there with this setup, 15cm(5.9") from the transom out of the 38.5cm(15.15") in total length...

[CircusCircus]

Will this set-up work on this boat? I know the speedo is fine, but not sure on the motor?http://cgi.ebay.com/ws/eBayISAPI.dll...tab%3DWatching

[Jesse J]

That looks like the same one, just blue instead of red. If it is same, you are golden. that motor screams!

[RandyatBBY]

Yes it is the same one, Boy they sure have gotten cheap. They have a lot of power at the cheapest price you can get. I found with Lipo this motor would be good on a little bigger boat about a 18 inch. On my 12 inch Mono (MP) it is too much.

[peells]

That is a great price on that motor and ESC combo I am using 2 of those esc's but 2 different motors rated at 3200 kva they seem to be pretty good so far and it sure makes the sport affordable I would buy two at that price because they don't come up that cheap very often but I didn't check on the shipping I hope it is not a rip sometimes they charge like 20 bucks shipping and kill the whole deal>

[CircusCircus]

Thanks guys, looks like $18.48 shipped for a motor and speedo Thats a good price alright.

[Waksk8n]

Hopefully I will be able to get it out for the first run tomorrow! Got my batteries from HK last night.

[Waksk8n]

Other options.

[RandyatBBY]

Other options.

Did you see how Jim Clark finished the motor?

[JimClark]

You mean this Randy? Hope to have mine all painted by this week. I am spraying red right now.