New Hull! FOUNTAIN P1 50" / 127cm Twin Setup

[twissted]

looks like a grate wardware. should be a fast boat. getting the stingers low as possible on a build like this is what will be the trick to getting fast.
Don't be afraid to work the rudder over to get the most from it. some stingers only pick up water frome one side. you should modify so that it picks up from both and polish when done. Are the stingers from HOR Racing?

[Alfa Spirit]

The rudder have 2 water inlets on both side , 2 on right side and 2 on left side that will give a good pressure for watercooling.
Yes the stingers are HOR models (3/16")

I made a set of cap banks for ESC, caps are 1000µF 63 Volts

[twissted]

Nice looking build so far!

[Alfa Spirit]

Thanks Twissted


This 50'' FOUNTAIN P1 hull is now available on Ebay, 237 US$ shipping included

http://cgi.ebay.fr/Fiberglass-50-P1-boat-hull-rc-boat-/160923448421?pt=UK_ToysGames_RadioControlled_JN&hash=item2577c8f465

[Alfa Spirit]

The 4092 - 930kV motors with HRC water jackets and aluminium motor mounts

[iridebikes247]

Wow the boat does look good with the decals. When will it be seeing water?

[twissted]

I live in a place that has ice, this time of year. I'm ice fishing this time every year. It could be the problem. Or he just is taking his time. I have a lot of builds that I jump on and take a brake and work on something else for a while. You just need to look at other builds for awhile and wait.

[Alfa Spirit]

Here is what I need :

- 2 x High Voltage speed controlers

- An other receiver Spektrum MR200

- A medium servo strong enough (15Kg)

- A LiFe 2S battery

- 4 x 5S 5000mAh batteries

- spare parts ....


For instance, here is the hardware I have :

[Doby]

So you have more than enough to start building........

[Xcesive8]

Im confused?
You have all the hardware to mount to the transom, but your going to wait until you recieve your electrical components?
Drill some holes already!

[Alfa Spirit]

The Rapid will be on the water first

Temp 412.jpg

[Alfa Spirit]

Hi,

I don't know what kind of servo choosing for the 50'' FOUNTAIN. Is a 15kg necessary? Please give me your advice, thanks


If a 15kg servo is not too powerful, I can have a good deal on this model.

[twissted]

Should be fine. so is that what your waiting on?

[Alfa Spirit]

I buy this servo on a french forum, it is new.

I ask myself (?) if 3/16" flex shafts will be strong enough... 10S for each 4092-930kV, 3000 Watts continuous

Thanks

[Rumdog]

Yup. Plenty strong.
Go drill some holes.